ANSWERER
Problem |
| Explanation/Solution |
Doesn’t answer, or answers on 10th ring. | • | Make sure the answerer is turned on. |
| • | Memory is full, erase some messages. |
| • Check the AC power and phone line | |
|
| connections. |
|
| |
Incoming messages are incomplete. | • Was an extension phone picked up? | |
| • | The caller left a message that is longer than the |
|
| message length you set during setup. |
| • | Memory is full. |
|
| |
Won’t respond to remote commands. | • Must use a | |
| • | Must enter the correct security code. |
| • | Did unit hang up? If you take no action for a |
|
| period of time, it automatically hangs up. |
|
|
|
Answerer doesn't work. | • | Unplug the power cord from the electrical |
|
| outlet and plug it back in to reset the answerer. |
|
|
|
After the unit is plugged in, FLASH ERROR is displayed
•Unplug the unit and plug it back in. If the message appears again, the unit needs service.
43