RCA 29893 manual Previous button Next button

You may need to use this feature if you have:

•Multiple area codes

•Overlapping area codes

•Areas that require 10-digit dialing.

1.If you just adjusted the Dialing menu, skip to step 2. If you haven’t adjusted any other setting, press and release the MENU button until REGIONAL AC# is displayed. The first digit of code #1 flashes.

2.Use NEXT or PREVIOUS to set the first digit.

3.Press ENTER. The next digit flashes.

4.Repeat steps 2-3 until all the digits of the regional area code are set.

5.When finished, press ENTER to confirm.The unit beeps.

NOTE: If you don’t want to enter any more area codes, press MENU. To exit setup, press PLAY/STOP.

NOTE: You can use MENU at any time to scroll through the settings. Also, if you don’t make a selection within 30 seconds, the unit automatically exits the setup menu.

TIP: You can use the keypad to enter all the digits in one step. To enter 891, press 8,9, and 1. Then press ENTER.

ENTER button

MENU button PLAY/STOP button

N

E

					W
					C
					ALL
MENU					MEMO
	ENT			TING
	ER	MESSAGE		GREE
ERASE	DIAL				VOL +
		ST OP
					ON/OFF
MEM DIAL STORE		MESSAG ES/CALLER ID		VOL -
					FLASH
A	1	ABC 2		DEF 3
QUICK DIAL
					REDIAL/PAUSE
B	GHI 4	JKL 5		MNO6
	RS 7		8	YZ 9	HOLD
C	PQ	TUV		WX
MEM DIAL	*			#
		OPER 0			SPEAKER
	TONE

mic

PREVIOUS button NEXT button

18