RCA 21028 manual Number of digits Explanation Example, Dialing a CID Number

4.Use the touch-tone pad to enter a memory location number (for example, press 01 to store the record in memory location one).

NOTE: If the memory location is occupied, “REPLACE MEMO?” is displayed, and you must confirm replacement by pressing the MEM button.

NOTE: Press the *EXIT button once to keep the previous setting and return to the sub-menu.

DIALING A CID NUMBER

While reviewing CID records, you may dial the phone number showing in the display.

1. Make sure the phone is OFF (not in talk mode).

2. Press CID/VOL ( or ) button until the desired CID record shows in the display.

NOTE: Depending on (a) how the incoming caller’s phone number is formatted when it is received, and (b) whether or not you previously pre- programmed your local area code into the set up menu, you may need to adjust the format of the incoming caller’s stored phone number before making the call.

Available formats include:

Number of digits	Explanation	Example
Eleven digits	long distance code “1 ”	1-317-888-8888
	+3-digit area code
	+7-digit telephone number.
Ten digits	3-digit area code +	317-888-8888
	7-digit telephone number.
Seven digits	7-digit telephone number.	888-8888

3.If the number does not dial as shown, press the FORMAT/CONF button. Repeat if necessary, until the correct number of digits show in the display.

41