RCA 21028 manual Exit, Mute

If you get a busy signal and want to keep dialing the number, press the REDIAL button to quickly redial the number.

EXIT

Press the *EXIT button to exit a menu function and return to the standby screen.

PAGE

The page feature helps you locate a misplaced handset.To send and receive pages, all handsets must be registered. If your handset is not registered, follow the instructions in the Registration section of this manual.

HANDSET TO HANDSET PAGING

Dual handsets are respectively named as Handset 1 and Handset 2.

1.Make sure the phone is OFF (not in talk mode).

2.Press and release the PAGE/INT button on a handset. PAGING EXTENSION? shows in the display.

3.Use the touch-tone pad to enter the handset number you want to page.

NOTE: If more than 2 handsets have been registered, you can page all handsets by pressing 5.

4.To cancel the page, press the *EXIT button, or press the PAGE/INT button. Or you may press TALK/END/CALLBACK on the receiving handset to enter intercom mode.

PAGING FROM THE BASE/GROUP PAGE

Use the base-only to page all registered handsets at the same time.

1.Press the page button on the base. Both handsets beep for two minutes, and PAGING FROM BASE shows on each handset’s display.

2.To cancel the page, press the page button on the base, or press the TALK/END/CALLBACK button or the *EXIT button on each handset.

MUTE

To have a private, off-line conversation, use the MUTE feature. The party on the telephone line cannot hear you, but you can hear them.

1.Press the MUTE/PROG button. The handset display shows MUTE ON.

2.Press the MUTE/PROG button to cancel and return to your phone conversation.

32