| 28 |
|
RAV-Ware connections
When you connect to the RAV unit,
To connect to the RAV
1.
Figure 3.4. RAV-Ware units
2Click the RAV icon you want to configure in the Connections pane.
•If you are connected serially or USB, the RAV configuration window appears.
•If you are connected through the network, you will be prompted to enter a user name and password.The default user name is ClearOne and the default password is RAV. (User name and password are not case sensitive)
Note:To connect to a RAV unit on a different subnetwork, use Network Find. See page 30.
Connected RAV unit
Configuration Screen
Online indicator with
RAV unit name
Figure 3.5. Configuration window
| 29 |
|
RAV-Ware files
You can save current
To save a file
1.From the File menu, select Save File.
2.Browse to the desired location and enter the name of the file.
3.Click Save.
Tip:You can
To create a new file
1.Click the New File toolbar icon.
2.Select either the RAV 600 or RAV 900 depending on your system.This will open the Configuration Screen where you can set user preferences for your RAV system.
3.Save the file.
To edit an existing file
1.Click the Edit File toolbar button.
2.Locate and select the file you want to edit.
3.Click Open.
4.Make desired changes to the file.
5.Save the file.
Note: The changes will only take effect after they have been imported to a connected RAV system.
To import a file
1.Connect to a RAV unit.
2.From the File menu, select Import.
3.Choose your RAV file.
4.Click Open.The RAV unit will reboot and then update with all the file changes.
Tip:You can also
Import to import a saved RAV file.
Technical Services Group ~ | Technical Services Group ~ |