ClearOne comm 900, 600 user manual Dialer

Page 25

 

44

 

RAV-Ware— Phonebook and Dialer Usage

Dialer

While most calls will be made using the RF controller, you can also manage all your calls from the Dialer in RAV-Ware. You can dial a number, redial the last dialed call and disconnect calls. You can also use flash settings, mute the microphones and adjust loudspeaker volume.

To open the Dialer

•Click the Dialer icon on the configuration window.

Note: This option is only available when you are connected to a RAV unit and have a telephone line connected to the LINE jack on the mixer.

Figure 3.30. Dialer window

To make a call

1.Click the ON/OFF button.

2.Dial the number as you would on a standard phone. The number appears in the display window at the top.

Note: You can also pre-dial the number and press the ON/OFF button to connect the call.

Tip:You can also dial using the 0-9, star (*) and number (#) on your keyboard. Use the comma

(,)key to enter a two second pause. The Enter key connects to and disconnects from the tele- phone line.

RAV-Ware— Phonebook and Dialer Usage

 

45

 

To make a call from the phonebook

1.Using the mouse, select the number in the phonebook.The name and number appear in the display window.

2.Click the ON/OFF button to dial the call.

Tip:You can also double-click the name in the phonebook.The phone will be taken off hook and the number dialed.

To end a call

•Click the ON/OFF button.

To redial

•Click the REDIAL button.The phone will automatically be taken off hook and the last dialed number will be called.

To send a Flash signal

•The Flash key can be used for call transfer, call waiting or conference calling if your telephone service includes these features. Refer to your local telephone service provider for details.

To mute/unmute

1.Click the MUTE button to mute all microphones.The LED on the microphones will illuminate red.

2.Click the MUTE button again to unmute all the microphones.The LED on the microphones will illuminate green.

To adjust call volume

•Use the UP and DOWN buttons to adjust the call volume to the desired level.

To return to the Configuration screen

• Click the Switch to Flow Window icon to return to the Configuration screen.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page Table of Contents Introduction RAV 600/900 Services and supportProduct returns UnpackingRF Radio Frequency Controller Product OverviewMixer Basic Room Design Microphone PodsBasic Room Design for RAV Speakers ceiling- or wall-mountInstallation Overview Network Information System Requirements for RAV-WareConnecting the RAV Basic Connections To set up audio conferencingAudio conferencing Attach the external antenna and turn it it is upright Auxiliary Devices Connecting video codecs, amplifiers and sound cardsTo connect to a video codec To connect to a sound cardConnecting PTZ cameras Connecting VCRs and DVD playersConnecting for serial control Connecting for USB controlTo connect to a digital phone Digital phonesRAV-Ware Software Configuration Introduction Install RAV-WareGetting started with RAV-Ware RAV-Ware overviewRAV-Ware files RAV-Ware connectionsCommunication Settings Configuring System SettingsNetwork Find Telephone Settings Regional SettingsMicrophones Customizing RAV ComponentsLoudspeakers Effects of using an external amplifierMixer Console Adjusting Line Input/Output settings Preconfigured video codecs, amplifiers and sound cardsLine Input and Output Adjusting Record/Playback settings Preconfigured record/playback devicesRecord and Playback Camera Controls Setting camera presetsDialer and Phonebook Usage PhonebookDialer System Checks Advanced FeaturesEvent Log Firmware upgrades Error MessagesDevice Toolbox Editor Using the RAV Managing Calls Using the ControllerAccessing the menu Using the Phonebook from the RF ControllerProgramming Phone Preferences Configuration Adjusting the SettingsTo perform RF radio test To select a frequencyTo enter flash duration To change LCD contrastTo check the RAV version To view the IP addressWeb Interface Overview Accessing the web interfaceDial To clear log To open event logTo download log Log Out System CheckTo open the system checks Appendix Troubleshooting MaintenanceAudio ControllerPinouts SpeakersCamera pinouts GeneralDimensions SpecificationsCommand structure Serial CommandsConventions Groups and channelsRAV serial commands Serial command error codesMeter type definitions Aarings Number of Rings to Auto Answer On AA Auto Answer Enable/ DisableAEC Acoustic Echo Canceller enable/ disable AD Auto Disconnect Enable/ DisableAecref Acoustic Echo Cancellation Reference Aconn Audible Connect / Disconnect IndicationCamctrlmode Camera Control Port Mode Batterylvl Battery LevelBaud Baud Rate Calldur Call DurationCampresetset Camera Preset Setup Campreset Camera PresetCamflow Camera Control Flow Control Cammove Move the CameraCamswitchlag Camera Switch Time Lag CAMPRESETSET2 Camera Preset SetupCamposition Camera Position Camtrack Camera TrackCleareffect Clear Effect Wide Band Telco Emulation Default Default The UnitClock Clock Set Country Country SelectionDial Dtmf Dialing Device Device Identification LabelDid Device ID Enetaddr Ethernet port IP address Enetgate Ethernet default Gateway addressEnetdhcp Ethernet Dhcp Selection Enetdnsa Ethernet DNS Server addressesGain Gain Adjustment Eqsel Equalization EnableEQ Equalization Flow Flow ControlHook Hook Flash Greport Gate ReportHookd Hook Flash Duration Label LabelLVL Level Lvlreporten Level Report EnableLvlreport Level Report Manufacturer Manufacturer Identification LabelNcsel Noise Cancellation Select Miccampreset Mic Camera PresetMtrx Matrix Routing Mute MutePhonebookadd Adds an Entry to the Phonebook Pbdial Dial a PB Entry by NamePhonebookcnt Queries the Number of Entries in the Phonebook Phonebookdel Deletes an Entry to the PhonebookRedial Dial the last number again Reset ResetRffreq RF Frequency Selection Ring Ring IndicationRingerlvl Audible Ring Level Silenceprst Silence Camera PresetRingersel Audible Ring Melody Selection Ringertest Audible Ring Melody TestSyschecks System Checks Stereomix Sets the Input to be a Stereo MixSysresult System Check Result 112Telcolvlctrl Telco TX Level Control Enable/ Disable TE Telco EnableVolume Volume Adjustment UID Unit IDCompliance Electrical Safety AdvisoryFCC Part 15/ICES-003 Compliance FCC Part 68 ComplianceEC Declaration of Conformity European ComplianceIndex
Related manuals
Manual 63 pages 19.21 Kb

600, 900 specifications

ClearOne Comm 900,600 is a cutting-edge communication platform designed to enhance audio and video conferencing experiences in both corporate and educational environments. With its advanced technology and user-friendly interface, ClearOne Comm 900,600 addresses the increasing demand for seamless collaboration in a hybrid work scenario.

One of the standout features of the ClearOne Comm 900,600 is its exceptional audio quality. Utilizing advanced beamforming microphone technology, the system captures sound from multiple directions while minimizing background noise. This ensures that every participant in a conference call is heard clearly, regardless of their position in the room. The system also supports high-definition audio processing, delivering crystal-clear sound that enhances the overall communication experience.

The ClearOne Comm 900,600 is equipped with state-of-the-art video capabilities as well, making it suitable for various applications. It supports high-definition video resolutions, enabling users to engage with their audience visually without compromising quality. The system is compatible with various video conferencing applications, ensuring flexibility for users who may prefer specific software solutions.

Another significant characteristic of the ClearOne Comm 900,600 is its scalability. Organizations can easily expand the system according to their needs. Whether it's a small meeting room or a large auditorium, the Comm 900,600 can be configured to accommodate various room sizes and setups. It provides multiple connection options, including USB and HDMI, making it easy to integrate with existing equipment.

Additionally, the ClearOne Comm 900,600 boasts a user-friendly interface that simplifies operation for all participants. Its intuitive controls ensure that even those unfamiliar with technology can navigate the system effortlessly. This focus on usability promotes a smooth and efficient meeting environment, which is essential in today’s fast-paced work culture.

Lastly, the ClearOne Comm 900,600 features robust security measures to protect sensitive data. It employs encryption protocols to safeguard communications while also adhering to industry standards for data protection. This ensures that organizations can conduct confidential discussions without concern for unauthorized access.

In conclusion, the ClearOne Comm 900,600 is an innovative solution for modern communication needs, offering advanced audio and video technologies, scalability, user-friendly operation, and strong security features. It is an essential tool for promoting effective collaboration in any organization.
Top Page Image Contents