| 34 |
|
To change telephone preferences
1.In the Preferences tab, set the system to
2.Select
3.Select from three available ringer melodies.
Click Ringer Test to hear selected melody. | Figure 3.14. Telephone preferences |
Note:This option is only available when you are connected to a RAV unit.
4.Select Audible Connect if you would like one tone to sound when the RAV is taken off hook and two tones to sound when the RAV is on hook.
5.Adjust ringer volume using the Ringer Level slider.
6.Enter the Local Number for the RAV
system.The local number displays on the third line of the RF Controller LCD.
| 35 |
|
Customizing RAV Components
Your RAV system is
Microphones
You can adjust microphone volume and enable or disable ALC (automatic level control) in the Microphone Settings window. Automatic Level Control automatically adjusts microphone levels to ensure participants’ voices are transmitted at consistent levels regardless of whether people are speaking loudly or softly.
To access Microphone Settings
•Click the Mic Pod icon on the Configuration screen.
To enable ALC
To select telephone configuration
1.In the Configuration tab, select the Country where the phone is being used.
2.Select the flash duration from the Flash Setting list.This setting is dependent on the requirements of your PBX or telephone provider.
Warning: The country code must be set correctly in
To adjust telephone volume
1.Select Receive ALC. Clearone recommends keeping Receive ALC (automatic level control) selected.This feature adjusts the
2.Use the sliders to adjust the level of the telco transmit and telco receive.
Note: If you select ALC, the Telco Receive slider is disabled.
Figure 3.15. Telephone configuration
Figure 3.16. Telephone level
•Click the ALC button.The indicator will turn green when ALC is enabled and the audio level sliders will be disabled.
To adjust audio level (volume)
•Using the slider, adjust the volume.The meter will display output levels.
To disable Acoustic Echo Cancellation (AEC)
1.Click the Advanced button.
2.Click AEC to disable Acoustic Echo Cancellation.
Note: AEC prevents echo from reaching the
AEC should be kept enabled for normal operation.
To disable Noise Cancellation (NC)
1. | Click Advanced. | Figure 3.17. Microphone settings |
|
| |
2. | Click NC to disable noise cancellation. |
|
Note: Noise Cancellation prevents ambient or background noise from being sent to the
Figure 3.18. Advanced settings
Technical Services Group ~
Technical Services Group ~