ClearOne comm 600 Line Input and Output, Preconfigured video codecs, amplifiers and sound cards

Page 22

 

38

 

RAV-Ware— Configuring Auxiliary Devices

Line Input and Output

The RAV mixer has jacks for Line Input and Line Output that allow you to connect different auxiliary devices. You can configure audio levels for these devices through RAV-Ware. You can use devices that have preconfigured audio settings from the Device Toolbox or you can manually set the audio settings for your line in and line out devices.

Preconfigured video codecs, amplifiers and sound cards

The audio settings for many common auxiliary devices such as video codecs, VCRs, amplifiers and sound cards, have been pre-configured for optimal performance with the RAV system. Preconfigured devices are listed in the Device Toolbox and can be placed on the Line In and Line Out icons.

Note: If you would like to add a device to the Device Toolbox, please refer to the Device Toolbox Editor on page 49.

To select a pre-configured line-level device

1. Click the Device Toolbox button to display preconfigured devices.

Figure 3.22. Line input device list

2.Click the plus sign (+) to expand the category that matches your device type.

3.Click the device name and drag it to the Configuration screen. Drop over the Line Input or Output.The label and icon will change based on the selected device.

Note: Video codecs will cover both Line Input and Output. A sound card should be placed on Line Input or on both Input and Output for web conferencing. An amplifier is Output only.

RAV-Ware— Configuring Auxiliary Devices

 

39

 

Adjusting Line Input/Output settings

If your device is not listed in the Device Toolbox you can manually customize and configure the audio of your auxiliary devices in the Line Input and Line Output windows. Line input and output devices include video codecs, CD players, amplifiers and sound cards.

To access line input settings

•Open the Line Input window by clicking on the Line Input device icon.

To adjust equalization

•Adjust the Low, Mid and High frequency tones using the Equalization sliders.

To adjust audio level (volume)

•Using the slider, adjust the volume.The meter will display input levels.

Note:To save the name and setting of your line input device, refer to the Device Toolbox Editor on page 49.

Figure 3.23. Line Input

To access line output settings

•Open the Line Output window by clicking on the Line Output device icon.

To adjust equalization

•Adjust the Low, Mid and High frequency tones using the Equalization sliders.

To adjust audio level (volume)

•Using the slider, adjust the volume.The meter will display input levels.

Note:To save the name and setting of your line output device, refer to the Device Toolbox Editor on page 49.

Figure 3.24. Line Output

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Table of Contents Introduction Product returns Services and supportRAV 600/900 UnpackingRF Radio Frequency Controller Product OverviewMixer Basic Room Design for RAV Microphone PodsBasic Room Design Speakers ceiling- or wall-mountInstallation Overview System Requirements for RAV-Ware Network InformationConnecting the RAV Basic Connections To set up audio conferencingAudio conferencing Attach the external antenna and turn it it is upright To connect to a video codec Connecting video codecs, amplifiers and sound cardsAuxiliary Devices To connect to a sound cardConnecting for serial control Connecting VCRs and DVD playersConnecting PTZ cameras Connecting for USB controlDigital phones To connect to a digital phoneRAV-Ware Software Configuration Getting started with RAV-Ware Install RAV-WareIntroduction RAV-Ware overviewRAV-Ware connections RAV-Ware filesCommunication Settings Configuring System SettingsNetwork Find Regional Settings Telephone SettingsCustomizing RAV Components MicrophonesLoudspeakers Effects of using an external amplifierMixer Console Adjusting Line Input/Output settings Preconfigured video codecs, amplifiers and sound cardsLine Input and Output Adjusting Record/Playback settings Preconfigured record/playback devicesRecord and Playback Dialer and Phonebook Usage Setting camera presetsCamera Controls PhonebookDialer System Checks Advanced FeaturesEvent Log Firmware upgrades Error MessagesDevice Toolbox Editor Using the RAV Using the Controller Managing CallsAccessing the menu Using the Phonebook from the RF ControllerProgramming Phone Preferences Adjusting the Settings ConfigurationTo enter flash duration To select a frequencyTo perform RF radio test To change LCD contrastTo view the IP address To check the RAV versionWeb Interface Overview Accessing the web interfaceDial To clear log To open event logTo download log Log Out System CheckTo open the system checks Appendix Audio MaintenanceTroubleshooting ControllerCamera pinouts SpeakersPinouts GeneralSpecifications DimensionsConventions Serial CommandsCommand structure Groups and channelsRAV serial commands Serial command error codesMeter type definitions AA Auto Answer Enable/ Disable Aarings Number of Rings to Auto Answer OnAecref Acoustic Echo Cancellation Reference AD Auto Disconnect Enable/ DisableAEC Acoustic Echo Canceller enable/ disable Aconn Audible Connect / Disconnect IndicationBaud Baud Rate Batterylvl Battery LevelCamctrlmode Camera Control Port Mode Calldur Call DurationCamflow Camera Control Flow Control Campreset Camera PresetCampresetset Camera Preset Setup Cammove Move the CameraCamposition Camera Position CAMPRESETSET2 Camera Preset SetupCamswitchlag Camera Switch Time Lag Camtrack Camera TrackClock Clock Set Default Default The UnitCleareffect Clear Effect Wide Band Telco Emulation Country Country SelectionDial Dtmf Dialing Device Device Identification LabelDid Device ID Enetdhcp Ethernet Dhcp Selection Enetgate Ethernet default Gateway addressEnetaddr Ethernet port IP address Enetdnsa Ethernet DNS Server addressesEQ Equalization Eqsel Equalization EnableGain Gain Adjustment Flow Flow ControlHookd Hook Flash Duration Greport Gate ReportHook Hook Flash Label LabelLvlreport Level Report Lvlreporten Level Report EnableLVL Level Manufacturer Manufacturer Identification LabelMtrx Matrix Routing Miccampreset Mic Camera PresetNcsel Noise Cancellation Select Mute MutePhonebookcnt Queries the Number of Entries in the Phonebook Pbdial Dial a PB Entry by NamePhonebookadd Adds an Entry to the Phonebook Phonebookdel Deletes an Entry to the PhonebookRffreq RF Frequency Selection Reset ResetRedial Dial the last number again Ring Ring IndicationRingersel Audible Ring Melody Selection Silenceprst Silence Camera PresetRingerlvl Audible Ring Level Ringertest Audible Ring Melody TestSysresult System Check Result Stereomix Sets the Input to be a Stereo MixSyschecks System Checks 112Volume Volume Adjustment TE Telco EnableTelcolvlctrl Telco TX Level Control Enable/ Disable UID Unit IDFCC Part 15/ICES-003 Compliance Electrical Safety AdvisoryCompliance FCC Part 68 ComplianceEuropean Compliance EC Declaration of ConformityIndex
Related manuals
Manual 63 pages 19.21 Kb

600, 900 specifications

ClearOne Comm 900,600 is a cutting-edge communication platform designed to enhance audio and video conferencing experiences in both corporate and educational environments. With its advanced technology and user-friendly interface, ClearOne Comm 900,600 addresses the increasing demand for seamless collaboration in a hybrid work scenario.

One of the standout features of the ClearOne Comm 900,600 is its exceptional audio quality. Utilizing advanced beamforming microphone technology, the system captures sound from multiple directions while minimizing background noise. This ensures that every participant in a conference call is heard clearly, regardless of their position in the room. The system also supports high-definition audio processing, delivering crystal-clear sound that enhances the overall communication experience.

The ClearOne Comm 900,600 is equipped with state-of-the-art video capabilities as well, making it suitable for various applications. It supports high-definition video resolutions, enabling users to engage with their audience visually without compromising quality. The system is compatible with various video conferencing applications, ensuring flexibility for users who may prefer specific software solutions.

Another significant characteristic of the ClearOne Comm 900,600 is its scalability. Organizations can easily expand the system according to their needs. Whether it's a small meeting room or a large auditorium, the Comm 900,600 can be configured to accommodate various room sizes and setups. It provides multiple connection options, including USB and HDMI, making it easy to integrate with existing equipment.

Additionally, the ClearOne Comm 900,600 boasts a user-friendly interface that simplifies operation for all participants. Its intuitive controls ensure that even those unfamiliar with technology can navigate the system effortlessly. This focus on usability promotes a smooth and efficient meeting environment, which is essential in today’s fast-paced work culture.

Lastly, the ClearOne Comm 900,600 features robust security measures to protect sensitive data. It employs encryption protocols to safeguard communications while also adhering to industry standards for data protection. This ensures that organizations can conduct confidential discussions without concern for unauthorized access.

In conclusion, the ClearOne Comm 900,600 is an innovative solution for modern communication needs, offering advanced audio and video technologies, scalability, user-friendly operation, and strong security features. It is an essential tool for promoting effective collaboration in any organization.
Top Page Image Contents