GE 28225 manual Battery Solutions, Move closer to base. The handset might be out of range

Page 40

Place the handset in the base for at least 20 seconds to reset unit.

Handset does not ring

Make sure the handset ringer is turned ON.

Move closer to the base. The handset may be out of range.

You may have too many extension phones on your line. Try unplugging some phones.

Check for a dial tone.

You experience static, noise, or fading in and out

Move closer to base. The handset might be out of range.

Relocate the base. Make sure base is not plugged into an electrical outlet with another household appliance.

Charge the battery.

Unit beeps

Place handset in base for 20 seconds; if it still beeps, charge battery for 16 hours.

Clean the charging contacts on handset and base with a soft cloth.

See solutions for “No dial tone.”

Replace the battery.

Unit locks up and there is no communication between the handset and base

Unplug the power adaptor from the electrical outlet and the back of the base. Remove the handset battery. Wait for 30 seconds and plug the power adaptor back into the base and electrical outlet. Reconnect the battery and charge for 16 hours.

Battery Solutions

If you experience any of the following problems, even after recharging the battery, you may need to replace the battery pack:

Short talk time

Poor sound quality.

Limited Range

40

Image 40
Contents DECT6.0 Important Information Interference InformationTelephone Network Information REN NumberHearing Aid Compatibility HAC LicensingFCC RF Radiation Exposure Statement Information for Dect ProductTable of Contents General Product Care Parts Checklist for 28225xx2 Model IntroductionBefore You Begin Telephone Jack RequirementsInstallation Digital Security SystemImportant Installation Guidelines Avoid areas of excessive dust, moisture and low temperatureBase Layout Handset Layout Display IconsInstalling the Phone Installing the Handset BatteriesBase Station Answering System Setup Setting the Voice LanguageAnswering System ON/OFF Recording the Outgoing AnnouncementRemote Access Code Announce Only On/OffMessage Alert Sample Outgoing AnnouncementRings to Answer Call ScreeningHandset Settings Programming Your PhoneMain Menu Date & TimeRinger Setup Ringer VolumeGroup Melody RingtoneAuto Talk Set AlarmRegistration Tones ON/OFF Select BaseDeregister Handset Handset Display Settings Reset HandsetWallpaper Handset NameBase Setup Dial ModeHandset Language Area CodeAnswering System Setup via the Handset Press the Soft Key Left SKL buttonAnswering System Operation Listening to Your MessagesMessage Playback Deleting MessagesBase Ringer Volume Memo RecordingTo delete all old messages with the handset To record a Memo at the BaseImportant Information Memory FullRemote Operation Making a Call Handset OperationReceiving a Call Changing the Earpiece Volume RedialingHandset Speaker Phone Muting the MicrophoneIntercom Operation Paging the HandsetKey Lock Making Intercom CallsCall Transfer / Forwarding Three Party ConferenceAfter receiving an external call Call Waiting Caller ID Caller ID CIDReceiving CID Records Reviewing CID Records In CID Memory Dialing a CID NumberDeleting a CID Record Storing CID Records in Internal MemoryAs you cannot reformat CID records stored in memory Deleting All CID Records Programming the Phone BookNew Entry Dialing from the Phone Book Edit EntryDelete Entry Delete All Call ListIf you choose Delete Entry If you choose Save NumberBattery Safety Precautions Changing the BatteriesIf you choose Delete All If you choose User NumberDisplay Messages Answering System Display MessagesHandset Sound Signals Troubleshooting GuideCordless Phone Solutions Telephone SolutionsBattery Solutions Move closer to base. The handset might be out of rangeAnswering System Solutions General Product CareAccessory Information Causes of Poor ReceptionWarranty Index 14 FMemory Model