GE 28225 Redialing, Changing the Earpiece Volume, Handset Speaker Phone, Muting the Microphone

Page 28

Redialing

The phone stores the last 10 numbers dialed in the redialling memory.

1.	Press the	button to view the dialed calls.
2.	Use the	or	button to select the desired record.

3.Press the /flash button to redial the desired record.

4.Press the /end button to terminate the call.

Changing the Earpiece Volume

Press the or button as often as necessary to change the earpiece volume during a call.

Handset Speaker Phone

Press the button to activate/de-activate the handset speaker.

Muting the Microphone

Press the </mute button to mute your connection, the screen displays the icon. To cancel and return to normal connection, press the </mute button again.

DND (Do Not Disturb)

The do not disturb feature (DND) allows you to mute the ringer of all registered handset(s) at the same time. The phone must be in standby mode. Press the DND button on the base, you will hear a confirmation tone, and the DND LED illuminates. To cancel the DND feature, press the DND button again. You can also mute the ringer tone while the phone is ringing by pressing the DND button on the base.

Muting the Ringer during an Incoming Call

Press the /end button during an Incoming call to stop the ring on the handset. Your answering system will continue to monitor the ring.

Disabling the Ringer on the Handset

Press the and hold the */tone/ringer button for 1.5 seconds in idle mode to activate or deactivate the handset Ringer. The icon turns ON or OFF.

28

Image 28

Contents DECT6.0 Important Information Interference InformationTelephone Network Information REN NumberHearing Aid Compatibility HAC LicensingFCC RF Radiation Exposure Statement Information for Dect ProductTable of Contents General Product Care Parts Checklist for 28225xx2 Model IntroductionBefore You Begin Telephone Jack RequirementsInstallation Digital Security SystemImportant Installation Guidelines Avoid areas of excessive dust, moisture and low temperatureBase Layout Handset Layout Display IconsInstalling the Phone Installing the Handset BatteriesBase Station Answering System Setup Setting the Voice LanguageAnswering System ON/OFF Recording the Outgoing AnnouncementRemote Access Code Announce Only On/OffMessage Alert Sample Outgoing AnnouncementRings to Answer Call ScreeningHandset Settings Programming Your PhoneMain Menu Date & TimeRinger Setup Ringer VolumeGroup Melody RingtoneAuto Talk Set AlarmRegistration Tones ON/OFF Select BaseDeregister Handset Handset Display Settings Reset HandsetWallpaper Handset NameBase Setup Dial ModeHandset Language Area CodeAnswering System Setup via the Handset Press the Soft Key Left SKL buttonAnswering System Operation Listening to Your MessagesMessage Playback Deleting Messages Base Ringer Volume Memo Recording To delete all old messages with the handset To record a Memo at the BaseImportant Information Memory FullRemote Operation Making a Call Handset OperationReceiving a Call Changing the Earpiece Volume RedialingHandset Speaker Phone Muting the MicrophoneIntercom Operation Paging the HandsetKey Lock Making Intercom CallsCall Transfer / Forwarding Three Party ConferenceAfter receiving an external call Call Waiting Caller ID Caller ID CIDReceiving CID Records Reviewing CID Records In CID Memory Dialing a CID NumberDeleting a CID Record Storing CID Records in Internal MemoryAs you cannot reformat CID records stored in memory Deleting All CID Records Programming the Phone BookNew Entry Dialing from the Phone Book Edit EntryDelete Entry Delete All Call ListIf you choose Delete Entry If you choose Save NumberBattery Safety Precautions Changing the BatteriesIf you choose Delete All If you choose User NumberDisplay Messages Answering System Display MessagesHandset Sound Signals Troubleshooting GuideCordless Phone Solutions Telephone SolutionsBattery Solutions Move closer to base. The handset might be out of rangeAnswering System Solutions General Product CareAccessory Information Causes of Poor ReceptionWarranty Index 14 FMemory Model