Telex C-2002 technical manual Opening menu, Level Menu Screen, Button Activated Setup Modes

Select Line/Main

Mainback

Remote Control Console 15

7.1.4Button Activated Setup Modes

----------LN1-LN2 - Per Line Parameters Setup
	----------Line Enable/Disable
	----------Tone/Local Setting
	----------Crossmute Enable/Disable
	----------Squelch
	----------TX Monitor Enable/Disable
	----------AGC
	----------TX Enable/Disable
	----------Unselect Normal/Locked
	----------DTMF ANI Decode Enable
----------F1-F16 - Function Tone Parameter Screen
	----------Function Tone Enable/Disable
	----------Tone Programming Screen
	-----------	Frequency Programming Screen
	-----------	Duration Programming Screen
----------SUP - Supervisor Function Enable/Disable
----------MUTE - Mute Button Setup
	----------Timed/Momentary
	----------Timed Mute Duration Setup
	----------	Incoming Select Call Setup
	----------	Select Call Timer Setup
	----------DTMF Rx Setup
----------MON - Monitor Programming Screen
----------	Auto/Manual Selection
----------	Monitor Tone Selection
	----------	Monitor Frequency
	----------	Monitor Duration
	----------	Monitor Level

7.2 Opening menu

The following buttons are active during this screen:

PROG1 - Pressing this button enters the Level Menu Screen. PROG2 - Directs the display to the System Settings Screen. PROG3 - Directs the display to the Alpha Settings Screen.

PROG4 - Exits the Setup Mode.

LN1-LN2 - Directs the display to the Line Tone/Local Screen.

F1-F8 - Function Tone Parameter Screen. SUP - Enables supervisor mode.

MUTE - Set mute functionality.

ALERT - Directs the display to the Alert Cadence Programming Screen. MON - Directs the display to the Monitor Programming Screen.

PROGRAMMING MODE LVLS SYS ALPHA EXIT

PROG1 PROG2 PROG3 PROG4

7.3 Level Menu Screen

When this screen is displayed the following buttons are active: PROG1 - Direct display to Main Level Settings Screen.

PROG4 - Go back to Opening Menu.PROG1 PROG2 PROG3 PROG4 Pressing any Line button - Displays the Line Level Setting Screen for that selected line.

Pressing any Mute button – Displays the PER line level of mute for that selected line.