Telex C-2002 Mute Level = -10dB, 10db dwn Back, Main level adjust MIC Spkr TX back, Desk hand Aux

Remote Control Console				17
7.3.1.3.1 Mute Button Level Screen
These parameters determine the level of Mute on a Per line bases.
	Mute Level		= -10dB
PROG1 – Resets level setting to default of –10db.	-10db dwn	up		back
PROG2 - Increments the level setting by 1db (maximum of –10db).
	PROG1 PROG2		PROG3		PROG4
PROG3 - Decrements the level setting by 1db (minimum of -30sec).
PROG4 - Saves the current level setting and returns to the Mute Programming Screen.

7.3.2Main Level Settings

PROG1 - Go to Microphones Screen. PROG2 - Go to Speaker Level Screen. PROG3 - Go to the Transmit Level Screen. PROG4 - Return to Opening Menu.

Main level adjust MIC SPKR TX back

PROG1 PROG2 PROG3 PROG4

7.3.2.1 Microphones Screen
	Main Mic adjust
PROG1 - Go to Desk microphone Preamp Gain Screen.				back
PROG2 - Go to Handset Preamp Gain Screen.	desk hand		aux
PROG3 - Go to the aux input levels screen.	PROG1	PROG2	PROG3	PROG4
PROG4 - Return to Main Level Settings screen.
7.3.2.1.1 Desk microphone Preamp Gain Screen
The current setting is shown in the upper right hand corner of the
	Deskmic level			0dB
screen. This setting is for the pre-amp level of the deskmic.
PROG1 - Resets level setting to default of +0dB.	0dB	dwn	up	back
	PROG1	PROG2	PROG3	PROG4
PROG2 - Increments the level setting by 1 dB (maximum of +10dB).
PROG3 - Decrements the level setting by 1 dB (minimum of -10dB).

PROG4 - Saves the current level setting and returns to the Microphones screen.

7.3.2.1.2 Handset Preamp Gain Screen

PROG1 - Resets level setting to default of +0dB.

PROG2 - Increments the level setting by 1 dB (max of +10dB). PROG3 - Decrements the level setting by 1 dB (min of -10dB). PROG4 - Saves the current level setting and returns to the

Microphones screen.

7.3.2.1.3 Aux Preamp Gain Screen

PROG1 - Resets level setting to default of +0dB.

PROG2 - Increments the level setting by 1 dB (max of +10dB). PROG3 - Decrements the level setting by 1 dB (min of -10dB). PROG4 - Saves the current level setting and returns to the

Microphones screen .

Handset level			0dB
0dB	dwn	up	back
PROG1	PROG2	PROG3	PROG4

Aux-in level: 0dB 0dB dwn up back

PROG1 PROG2 PROG3 PROG4

7.3.2.2 Speaker Level Setting

This setting is used to set the minimum volume level that an operator will be allowed to turn the speaker to.

PROG1 - Go to Microphones Screen.

PROG2 - Go to Speaker Level Screen.

PROG3 - Go to the Transmit Level Screen.

PROG4 - Return to Opening Menu .

7.3.2.2.1 Minimum Speaker Level

PROG1 - Resets level setting to default of -60dB.

PROG2 - Increments the level setting by 1 dB (maximum of 0dB).

Main level adjust MIC SPKR TX back

PROG1 PROG2 PROG3 PROG4

Min Spkr level -60dB -60dB dwn up back

PROG1 PROG2 PROG3 PROG4