Siemens 300 H Telephone, Deactivating identification at the other, If you logged on with a PIN

Using a different telephone in the same way as your own

Step by Step

Chip card reader:

Insert chip card

or

S

Enter the code!

SU

Identification with the chip card (optiset E advance only)

Precondition: You have been assigned a chip card by System Support for logon at other telephones. The tele- phone at which you wish to log on must be equipped with a chip card reader (optiset E signature module).

Within your own HiPath 4000 or Hicom 300 E/H system area:

Insert the chip card. All lamps light up briefly.

"ID card" and the number of the home station are indi- cated on the display.

At another HiPath 4000 or Hicom 300 E/H system in the integrated network:

Insert the chip card.

Enter the node code for your own HiPath 4000 or Hi- com 300 E/H system (enquire with System Support).

Enter your own number and press the square key.

		Deactivating identification at the other
		telephone
		If you logged on with a PIN:
		Press the key. The lamp lights up.
Service Menu
	MM Enter the service code.

PIN / COS?

Deactivate PIN?

Chip card reader:

or

Select and confirm.

Select and confirm.

Identification is deactivated automatically if the far-end telephone is not used for several minutes.

If you logged on with a chip card:

Remove	Remove the chip card when the telephone is in the idle
chip card	state.

64