BT Freestyle 350 – Issue 2 – Edition 01 – 08.01.07 – 7971
20 Using the phone
Entering names
When entering a name, the characters available for each key are displayed when the relevant button is pressed.
Use the keypad letters to enter names, e.g. to store TOM:
Press 
once to enter T.
Press 
three times to enter O.
Press 
once to enter M.
Writing tips
Press Del to delete the last digit.
Press 
to enter a space.
Press 
to switch between upper and lower case letters and numbers.
Use 
, 
and 
to enter other punctuation characters.
Entering numbers
Make sure you enter the full telephone number including the dialling code if you subscribe to a Caller Display service and want the name of your caller displayed instead of the number.
To enter a pause within a telephone number when storing a directory
entry, press and hold 
and a P will be displayed.
Using the directory
You can store up to 100 entries in the directory. Each entry contains a name and number. Names can be up to 15 characters long and numbers up to 24 digits.
Store an entry
1.Press 
to open the directory.
2.When storing the first entry:
The display shows Empty. Press Opt. New entry is displayed. Press OK.
When storing further entries:
The first entry is displayed. Press Opt. New entry is displayed. Press OK.
3.Enter the phone number and press OK.
4.Enter the name and press Save.
Dial an entry
1.Press 
and scroll 
or 
to the entry you want to dial.
Or to search alphabetically, press the relevant keypad button,
e.g. for ‘Tom’, press 
then scroll through the entries under T.
2.Press 
. The number is displayed and dialled.
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com