HANDL. DM142
Deskmaster 142
8 MEMORY NUMBERS
You can program 3 Direct
by pressing M1, M2, or VM (one button) or the Memory button + 0…9 (two buttons). Under the Voice Mail button VM you can program the Voice Mail number. If you press this button, the unit goes to handsfree mode and the Voice Mail number will be dialled automatically.
8.1 Programming Direct and Indirect memory numbers
•Press the Set button in standby mode. “ENTER NUMBER” appears on the display.
•Enter the desired telephone number and press the Set button to confirm.
•Enter the desired name.
•Press the Direct Memory button
Memory button , followed by the Indirect Memory number
8.2Saving a number from the Call List as a Direct/Indirect Memory number
• Select the desired call with the Up or Down button .
• Press the Set button . The number is shown on the display.
• Change the number if necessary or press the Set button to confirm. The name appears on the display if it was sent together with the number.
• Change the name if necessary.
• Press the desired Direct Memory button
direct memory; or press the Memory button , followed by the Indirect Memory number
8.3Calling a Direct /Indirect Memory number
•Press the desired Direct Memory button
•Pick up the handset or press the Handsfree button and the number will be dialled automatically.
Note: If the Voice Mail button (VM) is pressed, the number will be dialled automatically in handsfree mode.
8.4Changing a number or name in the Direct/Indirect Memory
• Select the desired telephone number in the Direct/Indirect Memory.
• Press the Set button . The desired number appears on the display.
• Change the number if necessary or press the Set button to confirm. The name appears on the display.
• Change the name if necessary.
• Press the desired Direct Memory button
direct memory; or press the Memory button , followed by the Indirect Memory number
Note: The Voice Mail button VM can not be changed, only overwritten !! (see 8.1).
ENGLISH
37