Telephone settings
Set date and time
The answering system announces the date and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. However, the year must be correct so that the day of the week can be calculated from the caller ID information.
1.Press MENU when the handset is not in use.
2.Press 
or 
to scroll to 
Set date/time, then press SELECT.
3.Press 
or 
to select the month then press SELECT, or use the dialing keys to enter a
Set date/time
ECO | ANS ON |
4.Press 
or 
to select the date then press SELECT, or use the dialing keys to enter a
5.Press 
or 
to select the year then press SELECT, or use the dialing keys to enter a
press SELECT.
6.Press 
or 
to select the hour then press SELECT, or use the dialing keys to enter a
7.Press 
or 
to select the minute then press SELECT, or use the dialing keys to enter a
8.Press 
or 
to select AM or PM.
Date: MM/DD/YY
ECO | ANS ON |
Time: HH/MM
ECO | ANS ON |
9.Press SELECT to save the settings and return to the previous menu. You hear a confirmation tone.
• If the date and time are not set when a message is recorded, the system announces, “Time and date not set,” before each message plays.
• The telephone plays two beeps if you enter an invalid number.
13