VTech CS6529-14, CS6529-4B Temporary tone dialing, Redial, To review and dial a redial entry

Telephone operation

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services.

1.During a call, press TONE .

2.Use the dialing keys to enter the number. The telephone sends touch-tone signals.

3.The telephone automatically returns to pulse dialing mode after you end the call.

Redial

Each handset stores the last 10 telephone numbers dialed.

•When there are already 10 entries, the oldest entry is deleted to make room for the new entry.

•Entries are in reverse chronological order.

•The handset plays two beeps when you reach the end or beginning of the redial list, or when you access the redial list with no records.

To review and dial a redial entry:

1. Press REDIAL when the phone is not in use.

2. Press , or REDIAL repeatedly until the desired entry displays.

3. Press or to dial.

-OR-

1.Press or when the phone is not in use.

2.Press REDIAL and then press , or REDIAL repeatedly until the desired entry displays.

3.Press SELECT to dial.

To delete a redial entry:

1.Press REDIAL when the handset is not in use.

2.Press , or REDIAL repeatedly to browse to the desired entry.

Redial #2/10

800-595-9511

ECO

3.Press DELETE to delete the displayed number. You hear a confirmation tone.

22