VTech CS6529-4B, CS6529-3, CS6529-25, CS6529-17 Battery charging, Displays Put in charger

Page 8

Getting started

Battery charging

Once you have installed the battery, the screen indicates the battery status

(see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 11 hours of continuous charging. See the table on page 60 for battery operating times.

If the screen is blank or displays Put in charger, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use for a short time. When the battery is low, the handset displays Low battery along with a flashing icon. If you are on a call in low battery mode, the handset plays short beeps to alert you.

The following table summarizes the battery charge indicators and actions to take.

			Battery indicators	Battery status	Action

	The screen is blank, or			The battery has no or very	Charge without interruption
	displays Put in charger and			little charge. The handset	(at least 30 minutes).
			flashes.	cannot be used.
			flashes.	cannot be used.

	The screen displays			The battery has enough	Charge without interruption
	Low battery and			charge to be used for a short	(about 30 minutes).
			flashes.	time.
			flashes.	time.

	The screen displays			The battery is charged.	To keep the battery charged,
	HANDSET X.				place it in the telephone
					base or charger when not
					in use.

If you place the handset in the telephone base or charger without plugging in a battery, the screen displays NO BATTERY.

After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. For instructions, see Set date and time on page 14. To skip setting, press CANCEL.

Date: MM/DD/YY

ECO

Image 8

Contents Complete user’s manual Registration Product newsTable of contents Answering system settings Answering system operationAppendix IndexParts checklist Getting startedTelephone base and charger installation Battery installation If you do not hear a dial toneBattery charging Displays Put in chargerInstallation options Tabletop to wall mount installationWall mount to tabletop installation See Telephone base and charger installation onTo use the voicemail Are you a new cable or VoIP subscriber?To use the built-in answering system Volume Handset layoutINT Telephone base layout RepeatTelephone settings Using the menuHandset ringer volume To enter the handset menuTelephone base ringer volume Ringer toneTo turn off the quiet mode Quiet modeTo set the duration and turn on the quiet mode Set date and time LCD language Press Select to choose LCD languageVoicemail number To set your voicemail numberTo manually turn off these indicators Clear voicemailKey tone Home area codeDial mode Telephone operation Volume MuteCall waiting Temporary ringer silencingTemporary tone dialing RedialTo review and dial a redial entry To delete a redial entryTo access a number in the directory To access a number in the caller ID logTo access a number on the redial list Check voicemailWeb address Transfer a callTo end paging Find handsetTo start paging To share an outside call Multiple handset useJoin a call in progress Intercom Answer an incoming call during an intercom callCall transfer using intercom Directory About the directoryAdd a directory entry Press Select to choose Add contactDirectory To start an alphabetical search Review and dial from the directoryAlphabetical search Edit a directory entry Delete a directory entrySpeed dial Assign a speed dial entryReassign a speed dial entry Dial a speed dial numberDelete a speed dial entry Clear SD #X?Information about caller ID with call waiting Caller IDAbout caller ID Missed call indicator Caller ID logMemory match Review and dial from the caller ID logView dialing options Save a caller ID log entry to the directory Delete the caller ID log entries Caller ID log screen messagesTo delete an entry To delete all entriesAnswering system settings Answering systemAnnouncement Record your own announcementPlay the announcement Delete your announcementTo turn on or off with a handset Answer on/offTo turn on or off with the telephone base Number of rings To turn this feature on or offCall screening Remote access code Message alert toneRecording time Answering system and voicemail Using the answering system and voicemail togetherAnswering system operation Message capacity New message indicationCall intercept To screen a call at the telephone baseTo screen a call at a handset Options while a message is being recordedMessage playback To play messages at the telephone baseTo play messages with a handset Options during playbackDelete all messages Record, play or delete memosTo delete all messages with the telephone base To delete all messages with a handsetMessage window displays Window display DescriptionRemote access Command DescriptionAppendix Expand your telephone systemAdd and register a handset To register a handsetReplace a handset To deregister all handsetsNo Battery Screen messagesAppendix Handset and telephone base indicators Handset lightsTelephone base lights Handset iconsBattery Battery needs charging whenThere is no dial tone TroubleshootingMy telephone does not work at all Charge light is off Low battery shows on the handset screenMy cordless handset isn’t performing normally Telephone does not ring when there is an incoming call Appendix Experience poor sound quality when using the speakerphone Hear other calls when using the telephoneMy caller ID features are not working properly Hear noise on the cordless handset and the keys do not workOut of range or no pwr at base shows on the handset screen Cannot retrieve voicemail messagesAnswering system does not respond to remote commands Outgoing announcement is not clearAnswering system does not record messages Messages on the answering system are very difficult to hearCommon cure for electronic equipment Important safety instructions Operating range Precautions for users of implanted cardiac pacemakersECO mode Energy-saving charging mode MaintenanceAbout cordless telephones Rbrc sealLimited warranty What does this limited warranty cover?How do you get warranty service? FCC, Acta and IC regulations FCC PartTechnical specifications Industry CanadaIndex Precautions for users of implanted cardiac pacemakers All rights reserved. Version 8 06/13 91-006053-010-100