Avaya 6424, 6416, 6408 user manual ÂkÅkÎÌxk@Î×ÂkÌN×ÎΞšÅ, Transfer button

3 Your voice terminal

,ÂkÅkÎÌxk@Î×ÂkÌN×ÎΞšÅ

Speaker button: to access the Speaker (lis- ten-only), Group listening or Speakerphone feature (listen and talk). Check with your sys- tem manager to see how your voice terminal is set. The light next to the button goes on when the feature is active.

Mute button: to turn off the microphone asso- ciated with the handset or the built-in speaker- phone so the other person on the call cannot hear you. The light next to the button goes on when the feature is active.

Hold button: to put a call on hold until you can

return to it.

Redial button: to automatically redial the last number you dialed (outside, extension, trunk number or feature access code).

Transfer button:

•while off-hook,to transfer a call to another voice terminal.

•while on-hook,to test your voice terminal lights and display.

Note: If the message «EXPORT VERSION» is dis- played, press the Transfer button while on-hook. If you experience any difficulty, contact your system manager.

Conference button:

•while off-hook,to set up a conference call of up to 6 people including yourself.

•while on-hook,to select a ringing pattern for your voice terminal. Press the button repeat- edly to cycle through the different patterns. After 7 seconds of no activity, the current ring pattern is saved.

Volume control button: to adjust the volume of the speaker, handset receiver level and ringer.

Message light: goes on when a message has been left for you. See your system manager for instructions on how to get your messages.