Wireless Installation and Configuration Guide
Overview of the AVPP
Before you can begin using the AVPP, you will need to do the following:
1.Install and configure the Avaya Voice Priority Processor (AVPP) within an IP telephony system.
2.Configure IP Office.
3.Configure the Access Points.
4.Configure the 3616/3620/3626 wireless phones.
Front Panel of the AVPP
The AVPP’s front panel contains ports to connect to the LAN,’ and an administrative computer via an RS- 232 port. Status LEDs supply information about the AVPP s functionality.
Link LEDs:
LNKOK – lit when there is a network connection.
ACT – lit if there is system activity.
COL – lit if there are network collisions.
NETWORK – connects to wired (Ethernet) LAN.
ERROR LED – lit when the system has detected an error.
STATUS LEDs – indicate system error messages and status.
1 – heartbeat, indicates gateway is running.
2 – if active calls.
3, 4, 5 – currently unused.
PWR (power jack) – connects to the AC adapter supplying power to the system.
Warning:
Only use the
Wireless Installation and Configuration Guide | Page 4 |
IP Office |