Avaya 15-601082 manual Sample Installation and Configuration

Wireless Phone Installation

Sample Installation and Configuration

A sample configuration set-up is available following the instructions below.

Note

Before you begin downloading software upgrades, you must create a Spectralink Login and password.

If you have an IP Office unit, do the following to set-up the wireless phones:

1.To create a VoIP extension on IP Office, you must first download the firmware upgrades for the phones and the AVPPs from the SpectraLink website: www.spectralink.com/softwareupdates

2.For the 10, 20 or 100 AVPP software, click Infrastructure. In the Product column, locate NetLink SVP Server, and do the following:

a.Download the .EXE. For the 10 and 20 AVPP, download Netlink SVP Server.exe. For the 100 AVPP, download Netlink SVP Server_01.exe.

b.Double-click the .EXE file and place the files in the same sub-directory as your TFTP server is pointed to.

Note 10, 20 and 100 AVPPs will not operate together in a network. The network must consist of all 10, all 20 or all 100 AVPPs.

For the wireless phone software, click Handsets. In the Product column, locate Netlink- e340/h340/i640-Avaya and do the following:

a.Download the .EXE.

b.Double-click the .EXE file and place the files in the same sub-directory as your TFTP server is pointed to.

3.Refer to the manufacturer’s documentation to configure the access point with the following information:

Access Point IP Address

Individual Access Point Name

Frequency Channel

Security Key Information

4.Using a Cat. 5 Ethernet cable, connect the IP Office unit’s LAN port to the AVPP’s Network port.

5.To configure the AVPP, see AVPP Configuration.

6.Create a VoIP extension for each wireless phone.

7.Configure the wireless phone.

Wireless Installation and Configuration Guide	Page 31
IP Office	[15-601082] Issue [1] (1 June 2006)