
Testing a Wireless Phone
Verify proper registration and operation of each wireless phone by performing the following tests on each wireless phone in an active wireless area.
1.To power on the wireless phone, press Power On/Start Call. A series of messages are displayed as the wireless phone acquires the system. The wireless phone should display the user extension. Any error messages should clear.
2.Press Power On/Start Call. The extension number should be replaced by information from the IP Office unit and you should hear a dial tone. Place a call and listen to the audio quality. To end the call, press Power Off/End Call.
3.Place a call to the wireless phone and verify ring, answer, clear transmit and clear receive audio.
4.Press Power On/Start Call.
5.To verify all programmed features on the wireless phone, press FCN and then press Power Off/End Call when finished.
6.To verify the programmed line appearances, press LINE and then press Power Off/End Call when finished.
7.Press Power Off/End Call. Any line indicators should turn off and the extension number display will return.
Wireless Installation and Configuration Guide | Page 50 |
IP Office |