Avaya 15-601082 manual QoS Configuration,  Traffic Class

Page 26

Wireless Installation and Configuration Guide

QoS Configuration

If QoS Configuration is selected from the SVP-II Configuration screen. A screen similar to the following is displayed:

Tags set packet priorities for QoS. Either DSCP or 802.1p tags may be used.

DSCP Tag - DSCP (Differentiated Services Code Point) is a QoS mechanism for setting relative priorities. In the IP header, packets are tagged with a DSCP field for type of service.

Traffic Class

Administration - tags set the priority for Telnet, TFTP and other administrative traffic. Administrative traffic can have the lowest priority because it does not require voice quality.

WT (In call)/WT (Standby) - in call traffic requires voice quality and may be set to a higher priority than standby traffic.

RTP - audio traffic to the IP PBX. It requires voice quality.

PBX - traffic not audio to the PBX.

Inter-SVP2- the information passing protocol the AVPP servers use to communicate with each other.

Wireless Installation and Configuration Guide	Page 20
IP Office	[15-601082] Issue [1] (1 June 2006)

Image 26

Contents IP Office Documentation information Avaya Support Table Of Contents Wireless Phone Installation Table Of Contents Page Declaration of Conformity Overview About this GuideShielded Cables Safety InformationImportant Information  Link LEDs Overview of the AvppFront Panel of the Avpp Internal Gatekeeper Multiple AvppTiming Function Avpp Capacity Servers Number of HandsetsOverview of Wireless Phone RequirementsPhone Specifications CcmsAvaya Voice Priority Processor Series Wireless PhonesSystem Components IP Office Access PointsEthernet Switch Tftp Server Administrative ComputerRouter IP Multicast AddressesPhone Display Required Materials Introducing the AvppOverview Locating the AvppConnecting via the Serial Port Avpp ConfigurationConnecting to the Avpp IntroductionConnecting via Telnet Avpp System MenuNetwork Configuration Send All Avpp Configuration Wireless Installation and Configuration Guide IP Office QoS Configuration  Traffic ClassChange Password Removing an Avpp Avpp AdministrationAdding an Avpp Changing the Master AvppEnter the FTP Server IP Address IP Office ConfigurationConfiguring the Wireless Phone with IP Office Manager Adding a New User Updating the Configuration Option Voice Messaging AccessIP Office Integration Factors MeaningPassword = # = OK Entering an Extension and PasswordExtension Error Extension ErrorRetry/Restart Password ErrorExtension Override Wireless Phone Installation System Configuration Sample Installation and Configuration Sample Setup Avpp Network Configuration Title Phone SetupWireless Phone Configuration Opening and Using the Admin MenuAvpp IP WEP IP Address OAI Server IP Default Gateway and Subnet MaskTftp Server IP Call Server IPStatic Entry Learn OnceLearn Always To EnterLicense Management Restore DefaultsSite Survey Mode Security Cisco FSR Fast Secure Roaming PasswordOAI On/Off UsernameAdmin PW User-defined Preferences PasswordExtension Standby Menu Item Long Pulse Page Configuration Process License ManagementPage Testing a Wireless Phone Press Power On/Start CallSite Certification Certifying the InstallationSolving Coverage Issues Important NoteDetect dBm Coverage Detect Overlap or ConflictsConfirm Supported Data Rates MACSeries Wireless Phones Software MaintenanceUpgrading Wireless Phones Message Download Failure or Recovery MessagesNormal Download Messages DownloadUpgrading the Avpp Overview TroubleshootingAvpp Troubleshooting Network Status Error StatusAlarm Text ActionPage Name Major Version Number Filename Software VersionGatekeeper Database Configuration Problems Wireless Phone TroubleshootingAccess Point Problems IntroductionWireless Phone Status Messages Message DescriptionDo not Power Page Essid Power Off/End Call AvppFailure has occurred during Page Index AvppAL7 1LZ