Wireless Phone Installation
AVPP Network Configuration
Title
Ethernet Address (fixed):
State
00:90:7A:01:24:93
Comment
Leave as default
IP Address:
Hostname:
Subnet Mask:
Default Gateway:
AVPP TFTP Download Master:
Primary DNS Server:
Secondary DNS Server
192.168.42.3
Sample1
255.255.255.0
192.168.42.1
192.168.42.1
NONE
NONE
The AVPP unit
System host name
Leave as default
IP Office unit
PC containing AVPP software
Leave as default
Leave as default
DNS Domain:
WINS Server:
Workgroup:
Syslog Server
Maintenance Lock:
Phone Setup
NONE
NONE
WORKGROUP
NONE
N
Leave as default
Leave as default
Leave as default
Leave as default
Leave as default
Boot up the phone by simultaneously pressing Power On/Start Call and Power Off/End Call. Release Power On/Start Call while still holding down Power Off/End Call. The MAC address is displayed.
To edit and access, press Up, Down and Select on the left side of the phone.
To navigate back one screen, press FCN.
To end programming, press Power Off/End Call.
To search for Network Config, press Down. To access configuration parameters, press Select. Configure the following information on the phone:
Title
IP Address
ESS ID (SSID)
State
Static or DHCP
Network Name (SSID)
Comment
Select IP address mode
SSID of the access point
License
Mgmt
9
Leave as default
Encryption
Ext.
Password
Match the configuration on the access point
Extension Number
Extension Password
Use the extension number created from User
Enter password for the phone extension from User
Wireless Installation and Configuration Guide | Page 33 |
IP Office |