Casio 4620SW manual Reset Phone, To delete all entries from a Call Log, To reset your IP Telephone

4.Press the Line/Feature button associated with the name/number of the person you want to call. o The associated Call Detail screen is displayed.

5.Select Call.

oThe phone goes off-hook.

oThe selected party's number is dialed.

oIf the "Phone Screen on Calling" option is set to "Yes" in your IP Telephone Options the Phone application screen is displayed.

oA Call Log entry is created for this call.

Note: If your administrator has set up the Enhanced Dialing feature, selecting Call causes the IP Telephone to automatically add any appropriate digits (such as those required to get an outside line) to phone numbers in the Missed and InAns Call Logs. If you press Call, but the call does not go through, check with your Telephone Administrator to ensure the Enhanced Dialing feature is set up properly for your environment.

6.Proceed with the call as you normally would.

To delete all entries from a Call Log:

1.To access the Call Log application, press the Log softkey. o The Missed Call Log is displayed by default.

2.Navigate to the Call Log screen containing the entries to be deleted.

3.Press the Delete All softkey.

oThe prompt "press Delete again to confirm" is displayed.

4.Visually verify that you want to delete all entries for the Call Log.

5.If you want to complete the deletion of all entries for this Call Log, press Delete.

Note: If you want to cancel the deletion without removing all of this Call Log's entries, press Cancel instead and exit this procedure.

oThe entries are removed.

oThe Call Log's Main Screen is displayed.

6.To exit the Call Log application, press the Phone/Exit () button.

To delete a single Call Log entry:

1.To access the Call Log application, press the Log softkey. o The Missed Call Log is displayed by default.

2.Navigate to the Call Log screen containing the entry to be deleted.

3.Press the Line/Feature button corresponding to the call to be deleted. o The Detail Screen for that call is displayed.

4.Press the Delete softkey.

oThe prompt "Press Delete again to confirm" is displayed at the top of the screen.

5.Visually verify that you want to delete the name and number displayed.

6.If you want to complete deleting this Call Log entry, press Delete.

Note: If you want to cancel the deletion and not remove this Call Log entry, then press Cancel instead and exit this procedure.

oThe entry is removed.

oThe remaining entries on this Call Log remain sorted in chronological order. o The Call Log's Main screen is displayed.

7.To exit the Call Log application, press the Phone/Exit () button.

Reset Phone

To reset your IP Telephone:

1.Press the Mute button.

2.Using the dial pad, press the following keys in sequence: 73738# o The display prompts "Reset values? * = no # = yes."

3.If you want to reset the phone without resetting any assigned values, press * (asterisk).

{Confirmation tone}

oThe display prompts "Restart phone? * = no # = yes."

If you want to reset the phone and any previously assigned (programmed) values, press # (the pound key). Note: Use this option only if your phone has programmed, static values.

4620SW IP Telephone End User Guide 13 P a g e