Setting Parameters – Time Server Settings
Parameter – tftp server | ConÞgurable through the 480i's Options List, |
| the Aastra 480i web client or through the |
| conÞguration Þles |
|
|
Description | The TFTP server’s IP address. If DHCP is |
| enabled and the DHCP server provides the |
| information, this Þeld is automatically |
| populated. Use this parameter to change the |
| IP address of the TFTP server. This will |
| become effective after this conÞguration Þle |
| has been downloaded into the phone. |
|
|
Format | IP address |
|
|
Default Value | 0.0.0.0 |
|
|
Range | Not Applicable |
|
|
Example | tftp server: 192.168.0.130 |
|
|
|
|
Parameter – sip rtp port | ConÞgurable through the conÞguration |
| Þles only |
|
|
Description | Indicates the port through which the RTP |
| packets will be sent to. The RTP port is used |
| for sending DTMF tones and for the audio |
| stream. Your network administrator may |
| close some ports for security reasons. You |
| may want to use this parameter to send RTP |
| data using a different port. |
|
|
Format | Integer |
|
|
Default Value | 3000 |
|
|
Range | Not Applicable |
|
|
Example | sip rtp port: 5130 |
|
|
Setting Parameters – Time Server Settings
The following section contains the parameters to conÞgure settings speciÞc to the timeserver.
Parameter – | ConÞgurable through the 480i's Options List |
time server disabled | or the conÞguration Þles |
|
|
Description | This parameter enables or disables the |
| time server. This parameter affects the time server1, |
| time server2 and time server3 parameters. Use "0" |
| to enable time server and "1" to disable time server. |
|
|
Format | Integer |
|
|
Default Value | 0 |
|
|
Range | 0 or 1 |
|
|
Example | Time server disabled: 0 |
|
|
11Model 480i SIP Admin Guide