#Network Settings
#================
#ip: | # This value is unique to each phone on a server |
| # and should be set in the “<mac>.cfg” Þle if |
| # setting this manually. |
#Line Settings
#=============
#Lines should be set in the <mac>.cfg Þle since these settings
#are unique to each phone.
#Notes: Setting parameters for lines 1 - 4 conÞgures the 4
#line/call appearance hard keys on the 480i. Setting parameters
#for lines 5 - 9 conÞgures the phone for additional line/call
#appearances that can be set up as softkeys.
#The maximum number of line/call appearances that can be
#conÞgured on the 480i is 8 or 9, depending on how the lines
#have been conÞgured.
#If all line/call appearances have been set up for the same
#number, a total of 9 lines can be conÞgured. If all line/call
#appearances have been set up between two different numbers, a
#total of 8 lines can be conÞgured. This means that when all
#line/call appearances are in use, 1 is connected while the rest
#are held. No further outgoing or incoming calls can be made until
#one of the line/call appearances becomes available.
Continued...
Appendix B: Sample Configuration Files
Model 480i SIP Admin Guide 32