Setting Parameters – Softkey Settings
This section contains the softkey parameters that can be conÞgured on the 480i phone. There are eighteen softkeys that can be conÞgured. These parameters can be conÞgured either from the Aastra.cfg or the <mac>.cfg Þle. Softkeys can be conÞgured as either speed dials or
as additional call/line appearances.
Parameter – | ConÞgurable through the conÞguration |
softkeyN type | Þles only |
|
|
Description | The type of soft key that will be |
| conÞgured to. |
|
|
Format | Text |
|
|
Default Value | Not Applicable |
|
|
Range | line or speeddial. N in the softkeyN type ranges |
| from 1 to 18 |
|
|
Example | softkey1 type: line |
| softkey2 type: speeddial |
|
|
|
|
Parameter – | ConÞgurable through the conÞguration |
softkeyN label | Þles only |
|
|
Description | The text label that should be displayed for |
| the soft key. If the soft key is of line type an |
| icon appears beside the soft key that |
| indicates the status of the line that this soft |
| key is conÞgured to. |
|
|
Format | Text |
|
|
Default Value | Not Applicable |
|
|
Range | Sequence of ascii characters. A width less |
| than 11 characters for line softkey type and a |
| width less than 9 for the speeddial softkey |
| type is suggested. N in the softkeyN label |
| ranges from 1 to 18 |
|
|
Example | softkey1 label: “Line 9” |
| softkey2 label: “info” |
|
|
Setting Parameters – Softkey Settings
Model 480i SIP Admin Guide 18