Aastra Telecom SIP manual Overview, General Requirements, About this Guide

Page 4

Overview

Overview

This SIP 480i IP phone Administration Guide provides information on the basic network setup that is required for the SIP 480i IP phone. It also includes details on the functioning and conÞguration of the 480i phone.

General Requirements

•A SIP based IP PBX system or network installed and running with a number created for the new 480i phone.

•SIP standard "RFC 3261"

•Access to a Trivial File Transfer Protocol (TFTP) server.

•802.3 Ethernet/Fast Ethernet LAN.

•Category 5/5e straight through cabling.

•Power over Ethernet (PoE) power supply (optional accessory – necessary only if no inline power is provided on the network).

About this Guide

This guide targets network administrators, system administrators, developers and partners who need to understand how to install the 480i on a SIP network. This guide contains information that is at a technical level more suitable for system or network administrators. Prior knowledge of IP Telephony concepts is recommended.

This guide complements the Aastra 480i Installation Guide and the Aastra SIP 480i IP Phone User Guide .

•Aastra 480i Installation Guide – contains installation and set-up instructions, information on gen- eral features and functions, and basic options list customization. Included with the phone.

•Aastra SIP 480i IP Phone Administration Guide – explains how to set the phone up on

the network, as well as advanced conÞguration instructions for the 480i. This guide contains information that is at a technical level more suitable for a system or network administrator.

•Aastra SIP 480i IP Phone User Guide – explains the most commonly used features and functions for an end user.

1Model 480i SIP Admin Guide

Page 3 Page 5
Image 4
Page 3 Page 5
Contents SIP IP Phone Page Table of Contents General Requirements OverviewAbout this Guide Methods of Installation 480i IP Phone Set up480i’s Options List Password Reset PhoneFactory Default Proxy IPAastra 480i Web Client Network 480i IP Phone ConfigurationSelect option 3. Subnet Mask to change the subnet mask SIP settings Tftp Server SettingsSelect option 6. Tftp Server to change the Tftp server Setting Parameters through Configuration Files Setting Parameters Network Settings Parameter dns1 Parameter dns2Setting Parameters Time Server Settings Setting Parameters Time Server SettingsTime server1 Default Value Range Setting Parameters SIP Authentication Parameter sip proxy ipSip registrar port Sip session timer Sip lineN display name Setting Parameters Softkey Settings SoftkeyN value Firmware Upgrade Firmware Upgrade Troubleshooting How to reset the 480i phone?How to reset a user’s password? How to set the 480i phone to factory default?Appendix a Configuring the 480i at the Asterisk IP PBX Exten = 1234,1,DialSIP/phone1,20 Appendix B Sample Configuration Files Aastra.cfg# Dhcp # least one time server IP address Appendix B Sample Configuration Files Appendix B Sample Configuration Files Mac.cfg Appendix B Sample Configuration Files Appendix B Sample Configuration Files Appendix B Sample Configuration Files Appendix B Sample Configuration Files Appendix C Tftp Server Set-up Limited Warranty Warranty Repair ServicesAfter Warranty Service ExclusionsAastra Telecom Inc 41-0099-00 Rev
Top Page Image Contents