Appendix A: Configuring the 480i at the Asterisk IP PBX
The following conÞguration illustrates how to create a user with an extension to make and receive calls using the Asterisk as the PBX. This conÞguration is deÞned in the “sip.conf” Þle present along with the other conÞguration Þles that are created when Asterisk is installed. Usually, the conÞguration Þles can
be found at the “/etc/asterisk” directory.
;This is used in the “extensions.conf” Þle to identify this ;physical phone when issuing Dial commands. [phone1]
;The type to use for the 480i is “friend”.
;”Peer” is used when the Asterisk is contacting a proxy, ;”user” is used for phones that can only make calls ;and “friend” acts as both a peer and a user. type=friend
;If your host has an entry in your DNS then you just enter the ;machines name in the host= Þeld.
host=dynamic |
|
defaultip=192.168.1.1 | ;default IP address that the phone is |
| ;conÞgured to |
;The password that phone1 will use to register with this PBX secret=1234
dtmfmode=rfc2833 | ;Choices are inband, rfc2833, or info |
mailbox=1000 | ;Mailbox for message waiting indicator |
;If a phone is not in a valid context you will not be ;able to use it. In this example' sip' is used. You can use ;whatever you like, but make sure they are the same, you will ;need to make an entry in your extensions.conf Þle (which we ;will get to later)
context=sip callerid="Phone 1" <1234>
Appendix A: Configuring the 480i at the Asterisk
Model 480i SIP Admin Guide 24