480i IP Phone Set up
The 480i’s Options List
1.Press the £button on the phone to enter the options list
2.Use the r and s to scroll through the list of options
3.Press the Show softkey, the 4 button or press the number corresponding to the option to select an option
4.Use the softkeys to change a selected option
5.Press the Done softkey at any time to save the change and exit the current option
6.Press the Cancel softkey, the 3 button or the kbutton at any time to exit without saving the changes
Administrator Level Options
Some options in the phone’s options list are considered administrator level options and require the administrator user name and password. When attempting to access administrator level options, the phone will prompt for the administrator password before allowing access. The default password for the administrator is “22222”. For all other phone options, please refer to the Aastra 480i Installation Guide.
The administrator level options in the phone’s Options List are:
•“8.Network”
•“9.SIP Settings”
•“4.Factory Default” found under option “10.Phone Status”
Network:
If DHCP is enabled, all the Network settings are automatically conÞgured. The 480i’s Þrmware allows the network settings to be manually entered, if for any reason the phone cannot populate any of the settings with DHCP enabled. If DHCP is disabled the following network settings can be conÞgured manually:
1.DHCP
This turns DHCP on or
off. IP Address, Subnet Mask and Gateway options are automatically populated and are
2.IP Address
This is the phone’s IP address. To assign a static IP address to the phone, disable DHCP.
3.Subnet Mask
To assign your own subnet mask to the phone, disable DHCP.
4.Gateway
To assign your own gateway IP address, disable DHCP.
5.DNS
To assign your own DNS addresses, disable DHCP.
6.TFTP Server
This is the TFTP server’s IP address.
3Model 480i SIP Admin Guide