Aastra Telecom Proxy IP, Proxy Port, Registrar IP, Registrar Port, User Name, Display Name

Page 7

SIP Settings:

If you have a proxy server or have a SIP registrar present at a different location than the PBX server, the following settings may need to be changed:

1.Proxy IP

This is the IP address of the proxy server.

2.Proxy Port

This is the SIP proxy server’s port number. By default this number is set to 5060.

3.Registrar IP

This is the IP address of the SIP registrar.

4.Registrar Port

SIP registrar’s port number. By default this is set to 5060.

5.User Name

This is used in the name Þeld

of the SIP URI for the 480i phone and for registering the 480i at the registrar.

6.Display Name

This is used in the display name Þeld of the From SIP header Þeld. Some IP PBX systems use this as the caller’s ID and some may overwrite this with the string that is set at the PBX system.

7.Auth Name

The authorization name that will be used in the username Þeld of the Authorization header Þeld of the SIP REGISTER request.

8.Password

The password that is used to register at the registrar.

Phone Status:

The following options display the phone’s status or allow you to power cycle the phone or reset the phone to its factory default settings.

1.Network Status

This shows the network status of the two Ethernet ports at the back of the phone. You can also view the phone’s IP and MAC addresses.

•IP Addr

Shows the IP address of the phone

•MAC Addr The MAC or the hardware address of the 480i’s Ethernet card

2.Firmware Version

This option displays information about the Þrmware that is currently installed on the 480i.

3.Reset Phone

This option lets you reboot the phone. A reset may be necessary when:

•There is a change in your network, OR

•To re-load the conÞguration information modiÞed through the conÞguration Þles to the phone, OR

•If the settings for the 480i on the IP PBX system had been modiÞed.

4.Factory Default

This option lets you reset the phone back to the factory default settings, including the network settings. Performing this operation will result in losing all user modiÞed settings.

Note: For information on other settings in the options list of the phone, please refer to the Aastra 480i Installation Guide provided with the 480i.

480i IP Phone Set up

Model 480i SIP Admin Guide 4

Page 6 Page 8
Image 7
Page 6 Page 8
Contents SIP IP Phone Page Table of Contents General Requirements OverviewAbout this Guide 480i IP Phone Set up Methods of Installation480i’s Options List Proxy IP PasswordReset Phone Factory DefaultAastra 480i Web Client Network 480i IP Phone ConfigurationSelect option 3. Subnet Mask to change the subnet mask SIP settings Tftp Server SettingsSelect option 6. Tftp Server to change the Tftp server Setting Parameters through Configuration Files Setting Parameters Network Settings Parameter dns2 Parameter dns1Setting Parameters Time Server Settings Setting Parameters Time Server SettingsTime server1 Default Value Range Parameter sip proxy ip Setting Parameters SIP AuthenticationSip registrar port Sip session timer Sip lineN display name Setting Parameters Softkey Settings SoftkeyN value Firmware Upgrade Firmware Upgrade How to reset the 480i phone? TroubleshootingHow to set the 480i phone to factory default? How to reset a user’s password?Appendix a Configuring the 480i at the Asterisk IP PBX Exten = 1234,1,DialSIP/phone1,20 Aastra.cfg Appendix B Sample Configuration Files# Dhcp # least one time server IP address Appendix B Sample Configuration Files Appendix B Sample Configuration Files Mac.cfg Appendix B Sample Configuration Files Appendix B Sample Configuration Files Appendix B Sample Configuration Files Appendix B Sample Configuration Files Appendix C Tftp Server Set-up Exclusions Limited WarrantyWarranty Repair Services After Warranty ServiceAastra Telecom Inc 41-0099-00 Rev
Top Page Image Contents