Note: At this point modiÞcations performed to the User name, Screen name, Authentication name and Password affect line 1 of the 480i only. ModiÞcations to the other lines should be done through the <mac>.cfg Þle. The NAT IP Address and NAT Port are currently not supported and will have no effect when set.
Setting Parameters through Configuration Files
The following are the parameters that can be used to conÞgure the 480i phone through the conÞguration Þles – aastra.cfg and <mac>.cfg. The "aastra.cfg" Þle conÞgures the settings server wide, while the <mac> conÞgures only the phones with the MAC address for which the Þle is named. The settings in the "aastra.cfg" Þle will be overriden by the settings which also appear in the <mac> cfg Þle.
480i IP Phone Configuration
Model 480i SIP Admin Guide 8