Aastra Telecom SIP manual # Dhcp

Page 30

Appendix B: Sample Configuration Files

#DHCP Setting

#============

dhcp: 1

# DHCP enabled.

#DHCP:

#0 = false, means DHCP is disabled.

#1 = true, means DHCP is enabled.

#Notes: If DHCP is disabled, the following network settings will

#have to be conÞgured manually either through the conÞguration

#Þles, the Options List in the phone, or the Web Client: IP

#Address (of the phone), Subnet Mask, Gateway, DNS, and TFTP

#Server.

#----------------------------------------------------------------------

#Network Settings

#================

#Notes: If DHCP is enabled, you do not need to set these network

#settings

#ip:

# This value is unique to each phone on a server

 

# and should be set in the “<mac>.cfg” Þle if

 

# setting this manually.

#subnet mask: #default gateway: #dns1:

#dns2: #tftp server:

#Additional Network Settings:

===========================

#sip registration period: 300 # Eg. every 300 seconds, a re-register

 

# request is sent to the SIP server.

#sip rtp port: 3000

# Eg. RTP packets are sent to port 3000.

#----------------------------------------------------------------------

Continued...

 

27Model 480i SIP Admin Guide

Image 30
Contents SIP IP Phone Page Table of Contents Overview General RequirementsAbout this Guide Methods of Installation 480i IP Phone Set up480i’s Options List Factory Default PasswordReset Phone Proxy IPAastra 480i Web Client 480i IP Phone Configuration NetworkSelect option 3. Subnet Mask to change the subnet mask Tftp Server Settings SIP settingsSelect option 6. Tftp Server to change the Tftp server Setting Parameters through Configuration Files Setting Parameters Network Settings Parameter dns1 Parameter dns2Setting Parameters Time Server Settings Setting Parameters Time Server SettingsTime server1 Default Value Range Setting Parameters SIP Authentication Parameter sip proxy ipSip registrar port Sip session timer Sip lineN display name Setting Parameters Softkey Settings SoftkeyN value Firmware Upgrade Firmware Upgrade Troubleshooting How to reset the 480i phone?How to reset a user’s password? How to set the 480i phone to factory default? Appendix a Configuring the 480i at the Asterisk IP PBX Exten = 1234,1,DialSIP/phone1,20 Appendix B Sample Configuration Files Aastra.cfg# Dhcp # least one time server IP address Appendix B Sample Configuration Files Appendix B Sample Configuration Files Mac.cfg Appendix B Sample Configuration Files Appendix B Sample Configuration Files Appendix B Sample Configuration Files Appendix B Sample Configuration Files Appendix C Tftp Server Set-up After Warranty Service Limited WarrantyWarranty Repair Services ExclusionsAastra Telecom Inc 41-0099-00 Rev