Cisco Systems 8941, 8945 manual Adjusting the Handset Rest, Procedure

Overview

Adjusting the Handset Rest

Adjusting the Handset Rest

You can adjust the handset rest of a wall-mounted phone so that the receiver does not slip out of the cradle.

Procedure

Step 1 Set the handset aside and pull the square plastic tab from the handset rest.

Step 2 Rotate the tab halfway (180 degrees).

Step 3 Hold the tab between two fingers, with the small notches (in the corners) facing you.

Step 4 Make sure the tab lines up evenly with the slot in the cradle.

Step 5 Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the handset rest.

	Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications Manager Express Version
	9.0 (SIP)
10	OL-25525-01