Cisco Systems 8945, 8941 manual Field Description

Page 101

Chapter

Automatically Disabling the Cisco Unified IP Phone Backlight

•Lift the handset.

When you turn the backlight on, it remains on until the phone has remained idle for a designated length of time, then it turns off automatically.

Table 6-1explains the Cisco Unified Communications Manager Administration fields that control when the backlight turns on and off. You configure these fields in Cisco Unified Communications Manager Administration in the Product Specific configuration window. (You access this window by choosing Device > Phone from Cisco Unified Communications Manager Administration.)

Table 6-1 Backlight On and Off Configuration Fields

Field

Description

 

 

Days Backlight Not

Days that the backlight does not turn on automatically at the time specified

Active

in the Backlight On Time field.

 

Choose the day or days from the drop-down list. To choose more than one

 

day, Ctrl-click each day that you want.

 

 

Backlight On Time

Time each day that the backlight turns on automatically (except on the days

 

specified in the Days Backlight Not Active field).

 

Enter the time in this field in 24 hour format, where 0:00 is midnight.

 

For example, to automatically turn the backlight on at 7:00 a.m., (0700),

 

enter 7:00. To turn the backlight on at 2:00 p.m. (1400), enter 14:00.

 

If this field is blank, the backlight will automatically turn on at 0:00.

 

 

Backlight On Duration

Length of time that the backlight remains on after turning on at the time

 

specified in the backlight On Time field.

 

Enter the value in this field in the format hours:minutes.

 

For example, to keep the backlight on for 4 hours and 30 minutes after it

 

turns on automatically, enter 4:30.

 

If this field is blank, the phone will turn off at the end of the day (0:00).

 

Note If Backlight On Time is 0:00 and the backlight on duration is blank

 

(or 24:00), the backlight will remain on continuously.

 

 

Backlight Idle Timeout

Length of time that the phone is idle before the backlight turns off. Applies

 

only when the backlight was off as scheduled and was turned on by an

 

end-user (by pressing a button on the phone or lifting the handset).

 

Enter the value in this field in the format hours:minutes.

 

For example, to turn the backlight off when the phone is idle for 1 hour and

 

30 minutes after an end-user turns the backlight on, enter 1:30.

 

The default value is 0:30.

 

 

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)

 

OL-20851-01

6-5

 

 

 

Page 100 Page 102
Image 101
Page 100 Page 102
Contents Text Part Number OL-20851-01 Americas HeadquartersPage N T E N T S Power Outage 802.1X Authentication and Status Troubleshooting and Maintenance Cable Specifications C-2 Network and Access Port Pinouts C-2 Viii Audience OverviewOrganization Chapter DescriptionRelated Documentation Cisco Unified Communications Manager AdministrationCisco Unified IP Phone 8900 Series Cisco Unified Communications Manager Business EditionCisco Product Security Overview Document ConventionsConvention Description Boldface fontImportant Safety Instructions An Overview of the Cisco Unified IP Phone Understanding the Cisco Unified IP Phones 8941 Features on the Cisco Unified IP Phone 8941 Networking Protocol Purpose Usage Notes What Networking Protocols are Used?Authentication on Cisco Unified IP Phones section Dynamic Host Configuration Protocol chapterCDP DhcpSIP See the LLDP-MED and Cisco Discovery ProtocolNologieswhitepaper0900aecd804cd46d.shtml Chapter in the Cisco Unified Communications Communications Manager Security GuideManager System Guide Related TopicsRelated Topic Feature OverviewConfiguring Telephony Features Providing Users with Feature Information Understanding Security Features for Cisco Unified IP PhonesCommunications Manager Refer to the Troubleshooting Guide for Cisco UnifiedTopic Reference Feature Description Overview of Supported Security FeaturesSecurity Profiles section on page 1-13for more information Access section onUnderstanding Security Profiles Configuration Menu section onIdentifying Encrypted Phone Calls Unified IP Phones section on page 1-16for more informationEstablishing and Identifying Secure Audio Conference Calls Results of Action Feature UsedInitiator’s Phone Overview Supporting 802.1X Authentication on Cisco Unified IP PhonesSecurity Restrictions Configuring Cisco Unified IP Phones in Cisco Unified CM Purpose For More Information Cisco Communications Manager Communications Manager Administration GuideCommunications Manager Administration Guide, Cisco Unified Communications Manager Communications Manager Administration Guide, EndTask Purpose For More Information See the Providing Power to the Cisco Unified IP Phone Installing Cisco Unified IP PhonesSee the Installing the Cisco Unified IP Phone section See the Footstand section onGuide for Cisco Unified Communications Manager Refer to Cisco Unified IP Phone 8941 and 8945 UserTerminology Differences User Guide Administration and System GuidesA P T E R Related Topic Understanding the Phone Startup Process, Network Setup Menu, Providing Power to the Cisco Unified IP PhonePower Type Guidelines Power GuidelinesPower Outage Obtaining Additional Information about Power Understanding Phone Configuration FilesUnderstanding the Phone Startup Process Resolving Startup Problems,Purpose Related Topics Adding Phones to the Cisco Unified CM DatabaseRefer to the Cisco Unified Communications Manager Adding Phones with Auto-Registration Adding Phones to the Cisco Unified CM DatabaseRequires MAC Method Address? TapsAdding Phones with Auto-Registration and Taps Adding Phones with BAT Adding Phones with Cisco Unified CM AdministrationDetermining the MAC Address for a Cisco Unified IP Phone OL-20851-01 Network Requirements Before You BeginNetwork and Access Ports, Handset, Speakerphone, Headset, Cisco Unified Communications Manager ConfigurationNetwork and Access Ports Headset HandsetSpeakerphone Audio Quality Subjective to the User See the Network and Access Ports section on Installing the Cisco Unified IP PhoneSee the Headset section on page 3-3for supported See the Adding Phones to the Cisco Unified CMCisco Unified IP Phone 8941 and 8945 Cable Connections Footstand Reducing Power Consumption on the PhoneChapter Footstand Higher Viewing Angle Hold Mute Speaker Verifying the Phone Startup ProcessLower Viewing Angle Before You Begin Configuring Startup Network SettingsConfiguring Security on the Cisco Unified IP Phone Procedure Configuration Menus on the Cisco Unified IP Phone Configuring Settings on the Cisco Unified IP PhoneUnlocking and Locking Options, Editing Values, Displaying a Configuration MenuSelect Administrator Settings Editing Values Network Setup Menu, IPv4 Setup Menu Options,Unlocking and Locking Options Select Network Setup MenuOption Description To Change Device Phone Phone ConfigurationPC Vlan IPv4 Setup Menu Options Related Topics 802.1X Authentication and Status Security Configuration MenuDevice Phone Phone Configuration Trust List MenuSettings Security Config Choose Applications AdministratorAuthentication Device Authentication Settings Security SetupOL-20851-01 Configuring Features, Templates, Services, and Users Set Builtin Bridge Enable to On Feature Description Configuration ReferenceChoose System Service Parameter and select Common Phone Profile Configuration System Enterprise PhoneConfiguration Device Device Settings Features and Services Guide, Call Display Features and Services Guide, Cisco CallAdministration Guide, Directory Number Forward Maximum Hop Count service parameterServices Guide, Monitoring and Recording Services Guide, Call Park and Directed CallUnderstanding Directory Numbers ParkNumbers System Guide, Understanding DirectoryServices Guide Unified Communications Manager FeaturesServices Guide, Cisco Web Dialer CMCServices Guide, Do Not Disturb Services Guide, Immediate DivertAdministration Guide, Hunt Group Feature, see the Cisco Unified CommunicationsManager Features and Services Guide, Hold Services Guide, Intercom Communications Manager FeatureRefer to Cisco Unified Communications Manager System Guide, Cisco Unified IPServices Guide, Music On Hold Features and Services Guide, MaliciousAdministration Guide, Message Waiting Administration Guide, Phone Button Features and Services Guide BargeFeatures and Services Guide, Quality Unified IP Phone 8941 and 8945 User GuideAdministration Guide, Conference Overview of Supported Security FeaturesBridge Configuration Creating Custom Phone Rings sectionServices Administration Guide, Time Period Administration Guide, Cisco Voice-Mail Bridge Configuration chapterPort Configuration Join and Direct Transfer PolicyConfiguring Personal Directory Configuring Corporate and Personal DirectoriesConfiguring Corporate Directories Synchronizer Modifying Phone Button TemplatesFor PAB, enter the following URL DND Configuring Softkey TemplatesSupported as a Setting Up Services Adding Users to Cisco Unified Communications Manager Click Add Selected Giving Users Access to the User Options Web PagesManaging the User Options Web Pages Click Save Selected/Changes Click Device AssociationEnter the appropriate search criteria and click Find Chapter Managing the User Options Web Pages Chapter Managing the User Options Web Pages Customizing the Cisco Unified IP Phone Customizing and Modifying Configuration FilesDistinctiveRingList File Format Requirements Creating Custom Phone RingsPCM File Requirements for Custom Ring Types Configuring a Custom Phone RingConfiguring the Idle Display Field Description OL-20851-01 Model Information Screen, Status Menu, Model Information ScreenSelect Status Messages Status MenuStatus Messages Screen Network Setup Menu section on page 4-4for Phones with Cisco Unified CM AdministrationAddress. See the Network Setup Menu section Message Description Possible Explanation and ActionMenu section on page 4-4for details Network Setup Menu section onSetup Menu section on page 4-4for details on Select Status Network Statistics Network Statistics ScreenDhcp Reboot Dhcp DisabledDhcp Waiting Coldboot Timeout SET Dhcp ColdbootSelect Call Statistics Call Statistics ScreenMOS LQK Voice Quality MetricsSelect Administrator Settings Select Security Setup Security ConfigurationMonitoring the Cisco Unified IP Phone Remotely Http//IPaddress Accessing the Web Page for a PhoneChoose Device Phone Disabling and Enabling Web Page AccessDevice Information UDI Network SetupDescription Description Network Statistics Lldp Streaming Statistics Device LogsStream Streaming Statistics Configuring Settings on the Cisco Unified IP Phone chapter Resolving Startup Problems Troubleshooting and MaintenanceChapter Resolving Startup Problems Identifying Error Messages Choose Tools Control Center Feature Services Verifying DNS SettingsSymptom Cisco Unified IP Phone Unable to Obtain IP Address Verifying Dhcp Settings Cisco Unified IP Phone Resets UnexpectedlyVerifying the Physical Connection Identifying Intermittent Network OutagesVerifying the Voice Vlan Configuration Checking Static IP Address SettingsVerifying that the Phones Have Not Been Intentionally Reset Eliminating DNS or Other Connectivity ErrorsProblem Possible Cause Troubleshooting Cisco Unified IP Phone SecurityChecking Power Connection General Troubleshooting Tips Locking Options section on page 4-3 for details Summary ExplanationHalfduxcollisionexceedthreshold Performing a Basic Reset Resetting or Restoring the Cisco Unified IP PhonePerforming a Factory Reset Operation Performing ExplanationMonitoring the Voice Quality of Calls Metric Change Condition Troubleshooting TipsCleaning the Cisco Unified IP Phone Where to Go for More Troubleshooting InformationChapter Cleaning the Cisco Unified IP Phone Providing Information to Users Via a Website How Users Access a Voice Messaging System Installing the Synchronizer How Users Configure Personal Directory EntriesPrograms Cisco Systems TabSync Configuring the SynchronizerSupport for International Call Logging Installing the Cisco Unified CM Locale InstallerOL-20851-01 Specification Value or Range Physical and Operating Environment SpecificationsNetwork and Access Port Pinouts Cable SpecificationsNetwork Port Connector Pin Number FunctionAccess Port Connector OL-20851-01 Example User Information for these Procedures Basic Phone Administration StepsAdding a User From an External Ldap Directory Adding a User to Cisco Unified CMChoose System Ldap Ldap Directory Click Perform Full Sync NowExample doe Configuring the PhoneProceed to the section Configuring the Phone, page D-3 Appendix Configuring the Phone Appendix Configuring the Phone Click Device Associations Performing Final End User Configuration StepsChoose User Management End User Sccp SIP Protocol FeaturesAppendix EFT Draft Cisco Confidential Tool Numerics IN-2 IN-3 IN-4 IN-5 LLDP-MEDCast CDP Dhcp Http Rtcp RTP Sccp SIP Srtp TCP Tftp TLS UDP MICIN-7 IN-8 Srst SrtpIN-9 Vlan
Related manuals
Manual 42 pages 53.39 Kb
Top Page Image Contents