Cisco Systems 8945 Creating Custom Phone Rings section, Overview of Supported Security Features

Chapter

Telephony Features Available for the Cisco Unified IP Phone

Table 5-1	Telephony Features for the Cisco Unified IP Phone (continued)
Feature		Description	Configuration Reference
Reroute Direct Calls to		Reroutes a direct call to users’ mobile phone to the	For more information, see the Cisco Unified
Remote Destination to		enterprise number (desk phone). For an incoming	Communications Manager Features and
Enterprise Number		call to remote destination (mobile phone), only	Services Guide, Cisco Unified Mobility.
		remote destination rings; desk phone does not ring.
		When the call is answered on their mobile phone,
		the desk phone displays a Remote In Use message.
		During these calls, users can make use of various
		features of their mobile phone.
Remote Port		Allows the administrator to configure the speed	To configure the parameter in the Cisco
Configuration		and duplex function of the phone Ethernet ports	Unified CM Administration application,
		remotely by using Cisco Unified CM	choose Device > Phone, select the appropriate
		Administration. This enhances the performance for	IP phone, and scroll to the Product Specific
		large deployments with specific port settings.	Configuration Layout pane (Switch Port
		Note If the ports are configured for Remote Port	Remote Configuration or PC Port Remote
		Configuration in Cisco Unified CM, the	Configuration).
		data cannot be changed on the phone.	To configure the setting on multiple phones
			simultaneously, configure the remote
			configuration in either Enterprise Phone
			Configuration (System > Enterprise Phone
			Configuration) or Common Phone Profile
			Configuration (Device > Device Settings >
			Common Phone Profile.
			(Switch Port Remote Configuration or PC Port
			Remote Configuration)
Ring Tone Setting		Identifies ring type used for a line when a phone	For more information, see the following:
		has another active call.	• Cisco Unified Communications Manager
			Administration Guide, Directory Number
			Configuration.
			• “Creating Custom Phone Rings” section
			on page 6-2.
Secure Conference		• Allows secure phones to place audio	For more information about security, see the
		conference calls using a secured conference	“Overview of Supported Security Features”
		bridge.	section on page 1-11.
		• As new participants are added by using	For additional information, see the following:
		Confrn, Join, cBarge, Barge softkeys or	• Cisco Unified Communications Manager
		MeetMe conferencing, the secure call icon
			System Guide, “Conference Bridges.”
		displays as long as all participants use secure
			• Cisco Unified Communications Manager
		phones.
		• The Conference List displays the security level	Administration Guide, “Conference
			Bridge Configuration”.
		of each conference participant. Initiators can
			• Cisco Unified Communications Manager
		remove non-secure participants from the
		Conference List. (Non-initiators can add or	Security Guide.
		remove conference participants if the
		Advanced Adhoc Conference Enabled
		parameter is set.)

	Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-20851-01		5-13