Cisco Systems 8941, 8945 manual Power Guidelines, Power Outage, Power Type Guidelines

Page 40

Chapter

Providing Power to the Cisco Unified IP Phone

Power Guidelines

Table 2-1provides guidelines for powering the Cisco Unified IP Phone 8941 and 8945.

Table 2-1	Guidelines for Powering the Cisco Unified IP Phone 8941 and 8945

Power Type		Guidelines

External power—Provided		The Cisco Unified IP Phone 8941 and 8945 use the CP-PWR-CUBE-3 power supply.
through the CP-PWR-CUBE-3
external power supply.

External power—Provided		The Cisco Unified IP Phone Power Injector may be used with any Cisco Unified IP Phone.
through the Cisco Unified IP		Functioning as a midspan device, the injector delivers inline power to the attached phone.
Phone Power Injector.		The Cisco Unified IP Phone Power Injector is connected between a switch port and the IP
		Phone, and supports a maximum cable length of 100m between the unpowered switch and
		the IP Phone.

PoE power—Provided by a		• The Cisco Unified IP Phone 8941 supports IEEE 802.3af Class 1 power on signal pairs
switch through the Ethernet		and spare pairs.
cable attached to the phone.		• The Cisco Unified IP Phone 8945 supports IEEE 802.3af Class 2 power on signal pairs

		and spare pairs
		• To ensure uninterruptible operation of the phone, make sure that the switch has a
		backup power supply.
		• Make sure that the CatOS or IOS version running on your switch supports your
		intended phone deployment. Refer to the documentation for your switch for operating
		system version information.

External power—Provided		The inline power patch panel WS-PWR-PANEL is compatible with the Cisco Unified
through inline power patch		IP Phone 8941 and 8945.
panel WS-PWR-PANEL

Power Outage

Your accessibility to emergency service through the phone is dependent on the phone being powered. If there is an interruption in the power supply, Service and Emergency Calling Service dialing will not function until power is restored. In the case of a power failure or disruption, you may need to reset or reconfigure equipment before using the Service or Emergency Calling Service dialing.

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)

2-4	OL-20851-01

Image 40

Contents Americas Headquarters Text Part Number OL-20851-01Page N T E N T S Power Outage 802.1X Authentication and Status Troubleshooting and Maintenance Cable Specifications C-2 Network and Access Port Pinouts C-2 Viii Overview AudienceOrganization Chapter DescriptionCisco Unified Communications Manager Administration Related DocumentationCisco Unified IP Phone 8900 Series Cisco Unified Communications Manager Business EditionDocument Conventions Cisco Product Security OverviewConvention Description Boldface fontImportant Safety Instructions An Overview of the Cisco Unified IP Phone Understanding the Cisco Unified IP Phones 8941 Features on the Cisco Unified IP Phone 8941 What Networking Protocols are Used? Networking Protocol Purpose Usage NotesDynamic Host Configuration Protocol chapter Authentication on Cisco Unified IP Phones sectionCDP DhcpNologieswhitepaper0900aecd804cd46d.shtml See the LLDP-MED and Cisco Discovery ProtocolSIP Communications Manager Security Guide Chapter in the Cisco Unified CommunicationsManager System Guide Related TopicsConfiguring Telephony Features Feature OverviewRelated Topic Understanding Security Features for Cisco Unified IP Phones Providing Users with Feature InformationTopic Reference Refer to the Troubleshooting Guide for Cisco UnifiedCommunications Manager Overview of Supported Security Features Feature DescriptionAccess section on Security Profiles section on page 1-13for more informationConfiguration Menu section on Understanding Security ProfilesIdentifying Encrypted Phone Calls Unified IP Phones section on page 1-16for more informationEstablishing and Identifying Secure Audio Conference Calls Initiator’s Phone Feature UsedResults of Action Supporting 802.1X Authentication on Cisco Unified IP Phones OverviewSecurity Restrictions Configuring Cisco Unified IP Phones in Cisco Unified CM Purpose For More Information Communications Manager Administration Guide, Cisco Communications Manager Administration GuideCisco Communications Manager Task Purpose For More Information Communications Manager Administration Guide, EndUnified Communications Manager Installing Cisco Unified IP Phones See the Providing Power to the Cisco Unified IP PhoneSee the Installing the Cisco Unified IP Phone section See the Footstand section onRefer to Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications ManagerUser Guide Administration and System Guides Terminology DifferencesA P T E R Related Topic Providing Power to the Cisco Unified IP Phone Understanding the Phone Startup Process, Network Setup Menu,Power Outage Power GuidelinesPower Type Guidelines Understanding Phone Configuration Files Obtaining Additional Information about PowerResolving Startup Problems, Understanding the Phone Startup ProcessPurpose Related Topics Adding Phones to the Cisco Unified CM DatabaseRefer to the Cisco Unified Communications Manager Adding Phones to the Cisco Unified CM Database Adding Phones with Auto-RegistrationRequires MAC Method Address? TapsAdding Phones with Auto-Registration and Taps Adding Phones with Cisco Unified CM Administration Adding Phones with BATDetermining the MAC Address for a Cisco Unified IP Phone OL-20851-01 Before You Begin Network RequirementsNetwork and Access Ports Cisco Unified Communications Manager ConfigurationNetwork and Access Ports, Handset, Speakerphone, Headset, Speakerphone HandsetHeadset Audio Quality Subjective to the User Installing the Cisco Unified IP Phone See the Network and Access Ports section onSee the Headset section on page 3-3for supported See the Adding Phones to the Cisco Unified CMCisco Unified IP Phone 8941 and 8945 Cable Connections Reducing Power Consumption on the Phone FootstandChapter Footstand Higher Viewing Angle Lower Viewing Angle Verifying the Phone Startup ProcessHold Mute Speaker Configuring Security on the Cisco Unified IP Phone Configuring Startup Network SettingsBefore You Begin Procedure Configuring Settings on the Cisco Unified IP Phone Configuration Menus on the Cisco Unified IP PhoneSelect Administrator Settings Displaying a Configuration MenuUnlocking and Locking Options, Editing Values, Unlocking and Locking Options Network Setup Menu, IPv4 Setup Menu Options,Editing Values Option Description To Change Network Setup MenuSelect PC Vlan ConfigurationDevice Phone Phone IPv4 Setup Menu Options Related Topics Security Configuration Menu 802.1X Authentication and StatusDevice Phone Phone Configuration Trust List MenuChoose Applications Administrator Settings Security ConfigAuthentication Device Authentication Settings Security SetupOL-20851-01 Configuring Features, Templates, Services, and Users Choose System Service Parameter and select Feature Description Configuration ReferenceSet Builtin Bridge Enable to On Configuration Device Device Settings Configuration System Enterprise PhoneCommon Phone Profile Features and Services Guide, Cisco Call Features and Services Guide, Call DisplayAdministration Guide, Directory Number Forward Maximum Hop Count service parameterServices Guide, Call Park and Directed Call Services Guide, Monitoring and RecordingUnderstanding Directory Numbers ParkSystem Guide, Understanding Directory NumbersUnified Communications Manager Features Services GuideServices Guide, Cisco Web Dialer CMCServices Guide, Immediate Divert Services Guide, Do Not DisturbManager Features and Services Guide, Hold Feature, see the Cisco Unified CommunicationsAdministration Guide, Hunt Group Communications Manager Feature Services Guide, IntercomRefer to Cisco Unified Communications Manager System Guide, Cisco Unified IPAdministration Guide, Message Waiting Features and Services Guide, MaliciousServices Guide, Music On Hold Features and Services Guide Barge Administration Guide, Phone ButtonFeatures and Services Guide, Quality Unified IP Phone 8941 and 8945 User GuideOverview of Supported Security Features Administration Guide, ConferenceBridge Configuration Creating Custom Phone Rings sectionServices Administration Guide, Time Period Bridge Configuration chapter Administration Guide, Cisco Voice-MailPort Configuration Join and Direct Transfer PolicyConfiguring Corporate Directories Configuring Corporate and Personal DirectoriesConfiguring Personal Directory Modifying Phone Button Templates SynchronizerFor PAB, enter the following URL Supported as a Configuring Softkey TemplatesDND Setting Up Services Adding Users to Cisco Unified Communications Manager Managing the User Options Web Pages Giving Users Access to the User Options Web PagesClick Add Selected Enter the appropriate search criteria and click Find Click Device AssociationClick Save Selected/Changes Chapter Managing the User Options Web Pages Chapter Managing the User Options Web Pages Customizing and Modifying Configuration Files Customizing the Cisco Unified IP PhoneCreating Custom Phone Rings DistinctiveRingList File Format RequirementsConfiguring a Custom Phone Ring PCM File Requirements for Custom Ring TypesConfiguring the Idle Display Field Description OL-20851-01 Model Information Screen Model Information Screen, Status Menu,Status Messages Screen Status MenuSelect Status Messages Phones with Cisco Unified CM Administration Network Setup Menu section on page 4-4forAddress. See the Network Setup Menu section Message Description Possible Explanation and ActionNetwork Setup Menu section on Menu section on page 4-4for detailsSetup Menu section on page 4-4for details on Network Statistics Screen Select Status Network StatisticsDhcp Disabled Dhcp RebootDhcp Waiting Coldboot Timeout SET Dhcp ColdbootCall Statistics Screen Select Call StatisticsVoice Quality Metrics MOS LQKSecurity Configuration Select Administrator Settings Select Security SetupMonitoring the Cisco Unified IP Phone Remotely Accessing the Web Page for a Phone Http//IPaddressDevice Information Disabling and Enabling Web Page AccessChoose Device Phone Network Setup UDIDescription Description Network Statistics Lldp Device Logs Streaming StatisticsStream Streaming Statistics Configuring Settings on the Cisco Unified IP Phone chapter Troubleshooting and Maintenance Resolving Startup ProblemsChapter Resolving Startup Problems Identifying Error Messages Verifying DNS Settings Choose Tools Control Center Feature ServicesSymptom Cisco Unified IP Phone Unable to Obtain IP Address Cisco Unified IP Phone Resets Unexpectedly Verifying Dhcp SettingsVerifying the Physical Connection Identifying Intermittent Network OutagesChecking Static IP Address Settings Verifying the Voice Vlan ConfigurationVerifying that the Phones Have Not Been Intentionally Reset Eliminating DNS or Other Connectivity ErrorsChecking Power Connection Troubleshooting Cisco Unified IP Phone SecurityProblem Possible Cause General Troubleshooting Tips Summary Explanation Locking Options section on page 4-3 for detailsHalfduxcollisionexceedthreshold Resetting or Restoring the Cisco Unified IP Phone Performing a Basic ResetPerforming a Factory Reset Operation Performing ExplanationMonitoring the Voice Quality of Calls Troubleshooting Tips Metric Change ConditionWhere to Go for More Troubleshooting Information Cleaning the Cisco Unified IP PhoneChapter Cleaning the Cisco Unified IP Phone Providing Information to Users Via a Website How Users Access a Voice Messaging System How Users Configure Personal Directory Entries Installing the SynchronizerConfiguring the Synchronizer Programs Cisco Systems TabSyncInstalling the Cisco Unified CM Locale Installer Support for International Call LoggingOL-20851-01 Physical and Operating Environment Specifications Specification Value or RangeCable Specifications Network and Access Port PinoutsNetwork Port Connector Pin Number FunctionAccess Port Connector OL-20851-01 Basic Phone Administration Steps Example User Information for these ProceduresAdding a User to Cisco Unified CM Adding a User From an External Ldap DirectoryChoose System Ldap Ldap Directory Click Perform Full Sync NowProceed to the section Configuring the Phone, page D-3 Configuring the PhoneExample doe Appendix Configuring the Phone Appendix Configuring the Phone Choose User Management End User Performing Final End User Configuration StepsClick Device Associations Protocol Features Sccp SIPAppendix EFT Draft Cisco Confidential Tool Numerics IN-2 IN-3 IN-4 LLDP-MED IN-5MIC Cast CDP Dhcp Http Rtcp RTP Sccp SIP Srtp TCP Tftp TLS UDPIN-7 Srst Srtp IN-8IN-9 Vlan

Related manuals

Manual 42 pages 53.39 Kb