Cisco Systems MD-110 manual Requirements, Phone System, Cisco Unity Server

Page 14

Chapter 1 Ericsson MD-110 Serial Integration

Integration Overview

Requirements

The Ericsson MD-110 integration supports configurations of the following components:

Phone System

•Ericsson MD-110

•Software level BC6 or later

•ICU card installed to provide the serial data port

•The serial data port in the phone system connected to a serial port (COM1 is the default) on the Unity server with an RS-232 serial cable

•The voice messaging ports in the phone system connected to the voice cards in the Cisco Unity server

•The phone system ready for the integration as described in the installation guide for the phone system

Cisco Unity Server

•The Dialogic® D/41EPCI™, D/120JCT-LS™, or D/120JCT-Euro™voice cards installed

•Cisco Unity installed and ready for the integration as described in the Cisco Unity Installation Guide

Caution To prevent Windows from mistaking the serial connection for a serial mouse when rebooting the Cisco Unity server, confirm that the Boot.ini file is set according to instructions. Otherwise, the integration will not work properly. For details on setting up the Boot.ini file, refer to “Installing Windows 2000 Server” in Chapter 3 of the Cisco Unity Installation Guide.

•A system key that enables the integration and the appropriate number of voice messaging ports

•An available serial port (COM1 is the default)

	Ericsson MD-110 Serial Integration Guide
1-2	OL-1290-01

Image 14

Contents

Ericsson MD-110 Serial Integration Guide Ericsson MD-110 Serial Integration Guide Dual Phone System Integration Shutting Down or Restarting the Cisco Unity Server A-2 Purpose AudienceConvention Description OrganizationConventions Cisco Unity Documentation Document LocationObtaining Documentation World Wide WebDocumentation Feedback Documentation CD-ROMOrdering Documentation Cisco.com To access Cisco.com, go to the following websiteObtaining Technical Assistance Technical Assistance CenterContacting TAC by Using the Cisco TAC Website Xii Integration Overview Integration StepsCisco Unity Server RequirementsPhone System Integration Description Connections Between the Phone System and Cisco UnityIntegration Features Go to System Licensing Licensed Features Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Switch Parameter Required SettingChange the final digit to 1, so the line reads To enter port settingsTo enable extensions beginning with zero Programming the Phone System To program the phone systemIs restarted Transfer type UsageTesting the Integration To set up the test configurationTo test an external call with release transfer NotificationMonitor Transfer To set up supervised transfer on Cisco UnityTo test an internal call with release transfer To test supervised transfer To return Example Subscriber to the default settingsSet the Rings to Wait For field to Click the Save icon Ericsson MD-110 Serial Integration Testing the Integration OL-1290-01 Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewEricsson MD-110 Serial Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To modify voice port settings To specify switch settings for Cisco CallManagerGo to System Switch IP Switch To reach someone on the traditional phone systemEricsson MD-110 Serial Integration Guide OL-1290-01 Changing the Number of Installed Ports Stop Unity To reinstall the AV-Cisco Tapi service providerTo remove the existing AV-Cisco TSP ProgramsRestart the Cisco Unity server Exiting the Cisco Unity Software To exit the Cisco Unity software from another computerTo shut down or restart the Cisco Unity server Starting the Cisco Unity SoftwareClick Shut Down Click Shut Down or RestartClick Start Cisco Unity To start the Cisco Unity software from another computerOL-1290-01 Phone System Integration To set the Port assignments in the Registry