Cisco Systems MD-110 manual Organization, Conventions, Convention Description

Page 6

Preface

Organization

Organization

Chapter 1 of the Ericsson MD-110 Serial Integration Guide describes the steps needed to integrate the phone system and the voice messaging system.

Chapter 2 describes the steps needed for a “dual phone system integration”—an integration of the voice messaging system with both Cisco CallManager and a traditional, circuit-switched phone system at the same time.

Conventions

The Ericsson MD-110 Serial Integration Guide uses the following conventions.

Table 1 Ericsson MD-110 Serial Integration Guide conventions

Convention	Description

boldfaced text	Boldfaced text is used for:
	• Key and button names. (Example: Click OK.)
	• Information that you enter. (Example: Enter
	Administrator in the User Name box.)

< >	Angle brackets are used around parameters for which you
(angle brackets)	supply a value. (Example: In the Command Prompt
	window, enter ping <IP address>.)

-	Hyphens separate keys that must be pressed
(hyphen)	simultaneously (for example, Ctrl-Alt-Delete).

>	A right angle bracket is used to separate selections that
(right angle	you make:
bracket)	• On menus. (Example: On the Windows Start menu,
	• On menus. (Example: On the Windows Start menu,
	click Settings > Control Panel > Phone and
	Modem Options.)
	• In the navigation bar of the Cisco Unity
	Administrator. (Example: Go to System >
	Configuration > Settings.)

Ericsson MD-110 Serial Integration Guide

vi	OL-1290-01

Image 6

Contents

Ericsson MD-110 Serial Integration Guide Ericsson MD-110 Serial Integration Guide Dual Phone System Integration Shutting Down or Restarting the Cisco Unity Server A-2 Purpose AudienceOrganization ConventionsConvention Description Cisco Unity Documentation Document LocationObtaining Documentation World Wide WebDocumentation CD-ROM Ordering DocumentationDocumentation Feedback Cisco.com To access Cisco.com, go to the following websiteObtaining Technical Assistance Technical Assistance CenterContacting TAC by Using the Cisco TAC Website Xii Integration Overview Integration StepsRequirements Phone SystemCisco Unity Server Integration Description Connections Between the Phone System and Cisco UnityIntegration Features Go to System Licensing Licensed Features Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Switch Parameter Required SettingTo enter port settings To enable extensions beginning with zeroChange the final digit to 1, so the line reads Programming the Phone System To program the phone systemIs restarted Transfer type UsageTesting the Integration To set up the test configurationNotification MonitorTo test an external call with release transfer To set up supervised transfer on Cisco Unity To test an internal call with release transferTransfer To return Example Subscriber to the default settings Set the Rings to Wait For field to Click the Save iconTo test supervised transfer Ericsson MD-110 Serial Integration Testing the Integration OL-1290-01 Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewEricsson MD-110 Serial Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To modify voice port settings To specify switch settings for Cisco CallManagerGo to System Switch IP Switch To reach someone on the traditional phone systemEricsson MD-110 Serial Integration Guide OL-1290-01 Changing the Number of Installed Ports Stop Unity To reinstall the AV-Cisco Tapi service providerTo remove the existing AV-Cisco TSP ProgramsRestart the Cisco Unity server Exiting the Cisco Unity Software To exit the Cisco Unity software from another computerTo shut down or restart the Cisco Unity server Starting the Cisco Unity SoftwareClick Shut Down Click Shut Down or RestartClick Start Cisco Unity To start the Cisco Unity software from another computerOL-1290-01 Phone System Integration To set the Port assignments in the Registry