Cisco Systems MD-110 manual Click Start Cisco Unity

Page 39

Appendix A Exiting and Starting the Cisco Unity Software and Server

Starting the Cisco Unity Software

Cisco Unity is a Windows 2000 service that is configured to start automatically when you turn on or restart the server. Do one of the following procedures only if you exited the Cisco Unity software but did not restart the server.

Exchange must be running before you start the Cisco Unity software. Like Cisco Unity, Exchange starts automatically when you turn on or restart the server. If you exited Exchange manually but did not restart the Cisco Unity server, start Exchange first.

To start the Cisco Unity software from the Cisco Unity server

Step 1 Log on to Windows as a Cisco Unity administrator.

Step 2 Right-click the Cisco Unity icon in the status area of the taskbar.

Step 3 Click Start Cisco Unity.

When Cisco Unity starts successfully, three tones play and a check mark appears in the Cisco Unity icon.

When Cisco Unity does not start successfully, two tones play and an “X” appears in the Cisco Unity icon.

Step 4 Press Ctrl-Alt-Delete, then lock or log off Windows to prevent access by unauthorized users.

Step 5 If the system uses the automated attendant and you routed calls to the operator before you exited the Cisco Unity software, reroute calls to Cisco Unity.

To start the Cisco Unity software from another computer

Step 1 Start Internet Explorer, and go to http://<Cisco Unity server name>/status. If prompted, enter the name and password of a Cisco Unity administrator.

Step 2 In the Cisco Unity Status Monitor, click the System Status icon (the first icon), at the top of the page.

Step 3 Click Start.

Step 4 If the system uses the automated attendant and you routed calls to the operator before you exited the Cisco Unity software, reroute calls to Cisco Unity.

 

 

Ericsson MD-110 Serial Integration Guide

 

 

 

 

 

 

OL-1290-01

 

 

A-3

 

 

 

Page 38 Page 40
Image 39
Page 38 Page 40
Contents
Ericsson MD-110 Serial Integration Guide Ericsson MD-110 Serial Integration Guide Dual Phone System Integration Shutting Down or Restarting the Cisco Unity Server A-2 Audience PurposeOrganization ConventionsConvention Description Document Location Cisco Unity DocumentationWorld Wide Web Obtaining DocumentationDocumentation CD-ROM Ordering DocumentationDocumentation Feedback Technical Assistance Center To access Cisco.com, go to the following websiteObtaining Technical Assistance Cisco.comContacting TAC by Using the Cisco TAC Website Xii Integration Steps Integration OverviewRequirements Phone SystemCisco Unity Server Connections Between the Phone System and Cisco Unity Integration DescriptionIntegration Features Switch Parameter Required Setting Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Go to System Licensing Licensed FeaturesTo enter port settings To enable extensions beginning with zeroChange the final digit to 1, so the line reads To program the phone system Programming the Phone SystemTransfer type Usage Is restartedTo set up the test configuration Testing the IntegrationNotification MonitorTo test an external call with release transfer To set up supervised transfer on Cisco Unity To test an internal call with release transferTransfer To return Example Subscriber to the default settings Set the Rings to Wait For field to Click the Save iconTo test supervised transfer Ericsson MD-110 Serial Integration Testing the Integration OL-1290-01 Dual Phone System Integration Overview Integration Steps When No Phone Systems Are InstalledEricsson MD-110 Serial Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To reach someone on the traditional phone system To specify switch settings for Cisco CallManagerGo to System Switch IP Switch To modify voice port settingsEricsson MD-110 Serial Integration Guide OL-1290-01 Changing the Number of Installed Ports Programs To reinstall the AV-Cisco Tapi service providerTo remove the existing AV-Cisco TSP Stop UnityRestart the Cisco Unity server To exit the Cisco Unity software from another computer Exiting the Cisco Unity SoftwareClick Shut Down or Restart Starting the Cisco Unity SoftwareClick Shut Down To shut down or restart the Cisco Unity serverTo start the Cisco Unity software from another computer Click Start Cisco UnityOL-1290-01 Phone System Integration To set the Port assignments in the Registry