Cisco Systems MD-110 manual Programming the Phone System, To program the phone system

Page 19

Chapter 1 Ericsson MD-110 Serial Integration

Programming the Phone System

Step 6 Save the file and close the text editor.

Step 7 For the setting to take effect, exit the Cisco Unity software, then restart the server. For more information, see the appendix, “Exiting and Starting the Cisco Unity Software and Server.”

Programming the Phone System

If you use programming options other than those supplied in the following procedure, the performance of the integration may be affected.

To program the phone system

Step 1 Use the EXTEI command to program the ELU extensions for connecting to the voice messaging ports. You must program the ports for:

•No call waiting

•No diversion

•No conferencing

•No intrusion

The ELU1 extension does not support message waiting indication for analog phones. The ELU24 extension provides stutter dial tone for message waiting indication.

Step 2 Use the VMPOI command to match the extensions and their ICU port numbers with the voice messaging ports on the Cisco Unity server. For example, the Cisco Unity port 01 must match Ericsson ICU port 1, extension 3500;

Cisco Unity port 02 must match Ericsson ICU port 2, extension 3501; and so on. The results of this example would be as follows:

VMPOI:ICUIND=1,DIR=3500,PORT=01

VMPOI:ICUIND=2,DIR=3501,PORT=02

		Ericsson MD-110 Serial Integration Guide
		Ericsson MD-110 Serial Integration Guide
	OL-1290-01			1-7
	OL-1290-01			1-7

Image 19

Contents

Ericsson MD-110 Serial Integration Guide Ericsson MD-110 Serial Integration Guide Dual Phone System Integration Shutting Down or Restarting the Cisco Unity Server A-2 Audience PurposeConventions OrganizationConvention Description Document Location Cisco Unity DocumentationWorld Wide Web Obtaining DocumentationOrdering Documentation Documentation CD-ROMDocumentation Feedback Technical Assistance Center To access Cisco.com, go to the following websiteObtaining Technical Assistance Cisco.comContacting TAC by Using the Cisco TAC Website Xii Integration Steps Integration OverviewPhone System RequirementsCisco Unity Server Connections Between the Phone System and Cisco Unity Integration DescriptionIntegration Features Switch Parameter Required Setting Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Go to System Licensing Licensed FeaturesTo enable extensions beginning with zero To enter port settingsChange the final digit to 1, so the line reads To program the phone system Programming the Phone SystemTransfer type Usage Is restartedTo set up the test configuration Testing the IntegrationMonitor NotificationTo test an external call with release transfer To test an internal call with release transfer To set up supervised transfer on Cisco UnityTransfer Set the Rings to Wait For field to Click the Save icon To return Example Subscriber to the default settingsTo test supervised transfer Ericsson MD-110 Serial Integration Testing the Integration OL-1290-01 Dual Phone System Integration Overview Integration Steps When No Phone Systems Are InstalledEricsson MD-110 Serial Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To reach someone on the traditional phone system To specify switch settings for Cisco CallManagerGo to System Switch IP Switch To modify voice port settingsEricsson MD-110 Serial Integration Guide OL-1290-01 Changing the Number of Installed Ports Programs To reinstall the AV-Cisco Tapi service providerTo remove the existing AV-Cisco TSP Stop UnityRestart the Cisco Unity server To exit the Cisco Unity software from another computer Exiting the Cisco Unity SoftwareClick Shut Down or Restart Starting the Cisco Unity SoftwareClick Shut Down To shut down or restart the Cisco Unity serverTo start the Cisco Unity software from another computer Click Start Cisco UnityOL-1290-01 Phone System Integration To set the Port assignments in the Registry