Cisco Systems MD-110 manual Is restarted, Transfer type Usage

Page 20

Chapter 1 Ericsson MD-110 Serial Integration

Programming the Phone System

Step 3

Use the GH command to create a hunt group for the voice messaging ports.

 

Make sure that the phone system sends calls only to Cisco Unity voice ports that

 

are set to Answer Calls on the System > Ports page in the Cisco Unity

 

Administrator. Calls sent to a voice port not set to Answer Calls cannot be

 

answered by Cisco Unity. And, if certain voice cards are installed, the call will not

 

be dropped, but the port remains unavailable for use until the Cisco Unity server

 

is restarted.

 

Step 4

Use the VMPOI command to associate the hunt group with Cisco Unity.

Step 5

Use the KS command to provide message waiting indication on DTS phones.

Step 6

Program each phone to forward calls to the pilot number assigned to the voice

 

messaging ports, based on one of the following Cisco Unity call transfer types.

 

Table 1-2 Call Transfer Types

 

 

 

 

 

Transfer type

 

Usage

 

 

 

 

 

Release transfer

 

Program the phone to forward calls to the pilot

 

(blind transfer)

 

number when:

 

 

 

• The extension is busy

 

 

 

• The call is not answered

 

 

 

 

 

Supervised transfer

 

Program the phone to forward calls to the pilot

 

 

 

number only when the call is not answered.

 

 

 

Confirm that call forwarding is disabled when the

 

 

 

extension is busy.

 

 

 

 

 

 

 

 

 

Ericsson MD-110 Serial Integration Guide

1-8

OL-1290-01

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Ericsson MD-110 Serial Integration Guide Ericsson MD-110 Serial Integration Guide Dual Phone System Integration Shutting Down or Restarting the Cisco Unity Server A-2 Purpose AudienceConvention Description OrganizationConventions Cisco Unity Documentation Document LocationObtaining Documentation World Wide WebDocumentation Feedback Documentation CD-ROMOrdering Documentation To access Cisco.com, go to the following website Obtaining Technical AssistanceCisco.com Technical Assistance CenterContacting TAC by Using the Cisco TAC Website Xii Integration Overview Integration StepsCisco Unity Server RequirementsPhone System Integration Description Connections Between the Phone System and Cisco UnityIntegration Features Configuring Cisco Unity for the Integration To confirm that the integration is enabledGo to System Licensing Licensed Features Switch Parameter Required SettingChange the final digit to 1, so the line reads To enter port settingsTo enable extensions beginning with zero Programming the Phone System To program the phone systemIs restarted Transfer type UsageTesting the Integration To set up the test configurationTo test an external call with release transfer NotificationMonitor Transfer To set up supervised transfer on Cisco UnityTo test an internal call with release transfer To test supervised transfer To return Example Subscriber to the default settingsSet the Rings to Wait For field to Click the Save icon Ericsson MD-110 Serial Integration Testing the Integration OL-1290-01 Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewEricsson MD-110 Serial Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To specify switch settings for Cisco CallManager Go to System Switch IP SwitchTo modify voice port settings To reach someone on the traditional phone systemEricsson MD-110 Serial Integration Guide OL-1290-01 Changing the Number of Installed Ports To reinstall the AV-Cisco Tapi service provider To remove the existing AV-Cisco TSPStop Unity ProgramsRestart the Cisco Unity server Exiting the Cisco Unity Software To exit the Cisco Unity software from another computerStarting the Cisco Unity Software Click Shut DownTo shut down or restart the Cisco Unity server Click Shut Down or RestartClick Start Cisco Unity To start the Cisco Unity software from another computerOL-1290-01 Phone System Integration To set the Port assignments in the Registry

MD-110 specifications

Cisco Systems MD-110 is a powerful communication solution designed to enhance enterprise voice and video capabilities, making it an integral component for organizations looking to streamline their communication infrastructure. This system is particularly beneficial for those utilizing Cisco's unified communications architecture, providing seamless integration and reliability.

One of the main features of the MD-110 is its support for both traditional and modern communication methods. It allows businesses to leverage VoIP (Voice over Internet Protocol) technology, facilitating high-quality voice calls over the internet. This capability significantly reduces overall communication costs while improving call clarity and reliability. The system also supports video conferencing, enabling organizations to host virtual meetings with high-definition video and audio quality, making remote collaboration more effective.

The MD-110 employs advanced technologies such as SIP (Session Initiation Protocol), which enables easy setup and management of voice and video calls. SIP provides flexibility in adding users and devices to the network, allowing businesses to scale their communication systems effortlessly as they grow. Furthermore, the integration of Cisco’s Collaboration tools enhances the user experience. Employees can access tools for messaging, presence, and file sharing all within the same ecosystem.

Security is another paramount characteristic of the MD-110. Cisco Systems emphasizes the need for robust security protocols, ensuring that voice and video communications are encrypted and protected from potential threats. Features such as secure dialing and monitoring tools help organizations maintain confidentiality and integrity in their communications.

Additionally, the system is designed for easy management and maintenance. Cisco's administration interface allows IT teams to monitor system performance, manage user accounts, and troubleshoot issues efficiently. This ease of management translates to less downtime and improved productivity throughout the organization.

In summary, Cisco Systems MD-110 is a versatile communication solution that combines traditional and advanced communication technologies. Its main features include support for VoIP and video conferencing, integration with Cisco Collaboration tools, robust security measures, and user-friendly management capabilities. This makes it an ideal choice for modern enterprises looking to enhance their communication capabilities while ensuring scalability and security.
Top Page Image Contents