AT&T TL72408 user manual Message counter displays

Answering system operation

Message counter

Message counter displays

The message counter usually displays the total number of answering system messages. See the table below for other message counter displays.

Message counter displays

0	No messages.
0 (flashing)	The clock needs to be set (page 38).
1-99	Total number of messages and memos,
	or message number currently playing.
1-99 (flashing)	Total number of messages and memos.
	The number flashes when there are new
	(un-reviewed) messages.
	After a power failure, the number in the
	message counter will flash to indicate
	the clock needs to be set.
10-99	Current remote access code while
	setting (page 44).
1-99 (counting)	Elapsed time while recording a memo
	(page 47) or announcement up to 90
	seconds (pages 40-41).
99 (flashing)	A memo recording is more than 99
	seconds.
F (flashing)	Memory is full. Messages must be
	deleted before new messages can be
	recorded.
--	System is answering a call, being
	accessed remotely, or the clock is being
	set.
-- (flashing)	System is being setup, initialized or
	messages are being deleted.

02, 04, 06, tS Displayed while setting the number of

	rings (page 43).
1-8	Displayed for two seconds while
	telephone base speaker volume is
	being adjusted.
HI, LO, OF	Displayed for two seconds while the
	telephone base ringer volume is being
	adjusted.

48