AT&T TL72408 user manual Troubleshooting

Appendix

Troubleshooting

The charge	•	Make sure the power and line cords are plugged in
light is off.		correctly and securely.
	•	Unplug the unit’s electrical power. Wait for 15 seconds,
		then plug it back in. Allow up to one minute for the
		cordless handset and telephone base to reset.
	•	Clean the cordless handset and telephone base charging
		contacts each month using a pencil eraser or cloth.
	•	Your phone might be malfunctioning. Please refer to the
		Limited warranty section of this user’s manual for further
		instruction.
My caller ID	•	Caller ID is a subscription service. You must subscribe to
isn’t working.		this service from your local telephone company for this
		feature to work on your phone.
	•	If you subscribe to high-speed Internet service (Digital
		Subscriber Line - DSL) through your telephone line, you
		must install a DSL filter between the telephone base
		and the telephone wall jack (see page 5). The filter will
		prevent noise and caller ID problems caused by DSL
		interference. Please contact your DSL service provider for
		more information about DSL filters.
	•	Your caller must be calling from an area that supports
		caller ID.
	•	Both you and your caller’s telephone companies must use
		caller ID compatible equipment.
System does	•	Make sure you subscribe to caller ID with call waiting
not receive		features services provided by your local telephone
caller ID when		company. Caller ID features will work only if both you and
on a call.		the caller are in areas offering caller ID service, and if
		both telephone companies use compatible equipment.

61