AT&T 9371 user manual Handset Ringer Style/Battery Save, Temporary Tone Dialing, Headset Jack

Page 11

9371_book_1ATT 8/14/01 10:00 AM Page 8

TELEPHONE OPERATION

AT THE HANDSET

Handset Ringer Style/Battery Save

You can select from four different handset ringer styles, or turn the ringer off and extend the battery life.

1Make sure the handset is off.

2Press pto enter programming mode.

3Press > until the screen displays RINGER:and the current setting.

4Press s; the current setting blinks.

5Press > to select 1, 2, 3, 4, or OFF. You will hear a sample of each ring.

6Press s or pto choose the displayed ringer setting.

Temporary Tone Dialing

If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing *. This is useful if you need to send touch tone signals for access to telephone banking or long-distance services.

1Dial the number.

2Press *. Buttons pressed after this send touch tone signals.

3After you hang up, the phone automatically returns to dial pulse (rotary) service.

Headset Jack

You can use this telephone hands-free when you install any AT&T 2.5 mm headset, purchased separately.

Plug the headset into the jack located on the right side of the handset (under the small rubber flap).

Do not force the connection, but make sure the plug

fits securely.

8

Image 11

Contents Part 1 Important Product Information Draft 8/14/01Advanced American Telephones. All rights reserved Contents About Caller Identification Caller ID Before YOU BeginInstall the handset battery InstallationBefore You Install Attach belt clip to the cordless handset optional Table/Desk InstallationConnect the telephone line cord Connect the power cord Set the time and date displayed on handset screen Charge the handset batterySet the dial mode Check for dial tonePosition the wall mount adapter on the base Wall InstallationMount the base on the wall Follow Steps 3-6 in Table/Desk InstallationTelephone Operation Headset Jack Handset Ringer Style/Battery SaveTemporary Tone Dialing Display Screen Messages Operating RangeMute Speaker VolumeHandset Locator Page/IntercomOne Touch Memory Telephone MemoryStore a Number in m Dial the mNumberStore a Number in the Directory Dial Edit Erase Edit a Number Stored in the DirectoryDial a Number Stored in the Directory Delete a Number Stored in the DirectoryDial a Number in Base Memory Store a Number in Base MemoryReview Call History Caller ID OperationAbout Call History Delete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific CallStore a Call History Record in the Directory About Mailboxes Audible IndicatorsAnswering System Operation Set the ClockAT the Base Record Your AnnouncementFeature Summary Answering System Feature SetupPlay Messages Adjust Playback VolumeListen to, Save & Delete Messages Delete MessagesRecord a Memo Call Screening/InterceptVoice Menu Remote Access CommandsConnect with the Answering System Turn system on End remote access callRecord memo Turn system offBatteries Charging the Handset Battery PackReplacing the Handset Battery Pack If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callCase of Difficulty If messages are incomplete If you hear noise or interference when using the phoneIf you hear other calls while using your phone If you lose a call after changing channelsIf your outgoing announcement isn’t clear If you have difficulty hearing messagesIf CL appears in the Message Window Answering System Remote CommandsMachine off press #0again Press