AT&T 9371 user manual Charge the handset battery, Check for dial tone, Set the dial mode

Page 7

9371_book_1ATT 8/14/01 10:00 AM Page 4

INSTALLATION

3Charge the handset battery.

Place the handset in the base. Charge the battery for at least 16 hours the first time. After the first charge, the battery is typically fully charged overnight.

4Check for dial tone.

After the batteries are charged, pick up the handset and press P; you should hear a dial tone.

5Set the dial mode.

If you have touch tone service, the phone is ready to use as soon as the batteries are charged.

If you have dial pulse (rotary) service, you’ll need to change the dial mode.

•Press pon the handset to enter programming mode.

•Press < or > until the screen displays DIAL MODE: and the currently selected mode.

•Press s. The current setting blinks.

•Press > to select TONE or PULSE.

•Press s or p, to save the displayed mode.

6Set the time and date displayed on handset screen.

If you subscribe to Caller ID service, the date and time will be set automatically with the first incoming call.

If you do not have Caller ID service, you can set the date and time manually.

•Press pon the handset to enter programming mode.

•Press < or > until the screen displays DATE/TIME and the current setting.

•Press s until the month blinks. Use < or > to change the month.

•Press s to save the new month; the day blinks. Use < or > to change the day.

•Press s to save the new day; the hour blinks. Use < or > to change the hour.

•Press s to save the new hour; the minute setting blinks. Use < or > to change the minutes.

•Press s to save the new minute setting; AM or PM blinks. Use < or > to switch between AM and PM.

•Press s or pto save the new date and time.

4

Image 7

Contents Part 1 Important Product Information Draft 8/14/01Advanced American Telephones. All rights reserved Contents About Caller Identification Caller ID Before YOU BeginBefore You Install InstallationInstall the handset battery Connect the telephone line cord Connect the power cord Table/Desk InstallationAttach belt clip to the cordless handset optional Set the time and date displayed on handset screen Charge the handset batterySet the dial mode Check for dial tonePosition the wall mount adapter on the base Wall InstallationMount the base on the wall Follow Steps 3-6 in Table/Desk InstallationTelephone Operation Temporary Tone Dialing Handset Ringer Style/Battery SaveHeadset Jack Display Screen Messages Operating RangeMute Speaker VolumeHandset Locator Page/IntercomOne Touch Memory Telephone MemoryStore a Number in m Dial the mNumberStore a Number in the Directory Dial Edit Erase Edit a Number Stored in the DirectoryDial a Number Stored in the Directory Delete a Number Stored in the DirectoryDial a Number in Base Memory Store a Number in Base MemoryAbout Call History Caller ID OperationReview Call History Delete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific CallStore a Call History Record in the Directory About Mailboxes Audible IndicatorsAnswering System Operation Set the ClockAT the Base Record Your AnnouncementFeature Summary Answering System Feature SetupPlay Messages Adjust Playback VolumeListen to, Save & Delete Messages Delete MessagesRecord a Memo Call Screening/InterceptConnect with the Answering System Remote Access CommandsVoice Menu Turn system on End remote access callRecord memo Turn system offBatteries Charging the Handset Battery PackReplacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If messages are incomplete If you hear noise or interference when using the phoneIf you hear other calls while using your phone If you lose a call after changing channelsIf CL appears in the Message Window If you have difficulty hearing messagesIf your outgoing announcement isn’t clear Answering System Remote CommandsMachine off press #0again Press