AT&T SB67148 user manual Deskset basic operation, Line indicators

-OR-

To override automatic line selection, press LINE 1-LINE 4 for the desired line.

2. Wait for a dial tone, then enter the telephone number. The screen displays the elapsed time as you talk (in hours, minutes and seconds).

To make a call using the corded headset:

Make sure a corded headset is connected to the deskset (page 12).

1. Press HEADSET on the deskset.

-OR-

To override automatic line selection, press LINE 1-LINE 4 for the desired line, and then press HEADSET.

2. Wait for a dial tone, then dial the number. The screen displays the elapsed time as you talk (in hours, minutes and seconds).

19

Elapsed time

Deskset operation

Deskset basic operation

The telephone comes programmed to use line 1 (default primary line) for outgoing calls when you do not press a line key. (To change the primary line, see Line selection on page 16.) When you answer a call, the telephone automatically selects the ringing line.

Line indicators

Each of the four indicators on LINE 1-LINE 4 indicates the status of the corresponding telephone line.

• On when the corresponding line is in use.

• Flashes slowly when the line is on hold.

• Flashes slowly when there is a transferred call on the corresponding line.

•Flashes slowly when there is an incoming auto attendant transferred call on the corresponding line.

•Flashes rapidly when there is an incoming call on the corresponding line.

Make a call

To make a call using the corded handset:

1.Lift the corded handset.

-OR-

To override automatic line selection, press LINE 1-LINE 4 for the desired line, and then lift the corded handset.

2.Wait for a dial tone, then enter the telephone number. The screen displays the elapsed time as you talk (in hours, minutes and seconds).

To make a call using the speakerphone: 1. Press SPEAKER on the deskset.

L1

Line1 00:00:30 8888832445

Option