AT&T 3658B user manual Feature Setup Handset, Feature Setup Menu, Set Time

Page 12

ATT3658B manual-updated 5/19/04 5:34 PM Page 9

FEATURE SETUP – HANDSET

Feature Setup Menu

Press the softkey under	MENU to enter the Feature
Setup menu. Use	or	to choose
features, then select	OK	to save your choice.

NOTE: If you wait more than 20 seconds without pressing a key, the handset returns to the idle screen.

NOTE: If you receive an incoming call while in feature setup, the phone automatically exits the menu to let you take the call.

	Set Time
	You can choose to set the time manually, or you
	can allow it to be set automatically with incoming Caller
	ID information.

1Press MENU .

2 Press until the screen displays

CALLS LOG

INTERCOM

HANDSET SETTINGS

SETSET TIMETIME

		▲	OK	▼
3	Press	OK . The screen displays the
	current time setting. Use		to move
	the cursor, and use the keypad to change a digit.
	Press	AM/PM to select AM or PM.
4	Press	SAVE to save the displayed time.

NOTE: To set up the answering system clock, please see ANSWERING SYSTEM OPERATION on page 45 in this manual.

FEATURE SETUP – HANDSET

9

Image 12

Contents With Caller ID/Call Waiting Part 1 Important Product InformationAdvanced American Telephones. All Rights Reserved Contents Parts List YOUBefore YOU Begin Beforeyou Beginin About Caller Identification Caller IDAbout the Calls Log About Adding HandsetsInstallationi InstallationTable/Desk Installation Installation Install the handset batteryCharge the handset battery Check for dial toneAbout Handset Registration Register an Additional Handset Model 5800 HandsetWall Installation Follow Steps 3-5 in Table/Desktop InstallationInstallationi Spare Battery/Power Failure BackupBelt Clip HeadsetFeature Setup Handset Feature Setup HandsetFeature Setup Menu Set TimeClock Mode RegisterSound Select Ringer Volume Ringer #01 Ringer MelodyLow Batt Tone Range Tone Keypad Tone Set Contrast Language Setting Feature Setup Base Feature Setup BaseRelease Mto save your setting Telephone Operation Telephone OperationMake a Call Answer a CallVolume HandsetBase Speaker Switch Between Handset and Speakerphone Handset SpeakerphoneMake a Call Answer a CallRedial Save a Redial NumberDelete a Redial Number Flash/Call Waiting BaseMute Hold Display Screen Messages Screen Displays WhenHandset Icons This Icon IndicatesBase Lights Light Status IndicatesTones and What They Mean Tone IndicatesIntercom Operation Intercom OperationIntercom Calls Operation IntercomAnswering Intercom End IntercomBlind Call Transfer From the HandsetConference Calling Phone Book Phone BookStore a Number and Name in Phone Book Keypad Characters Dial a Number in Phone BookGeorge Edit a Number/Name in Phone BookDelete a Number/Name in Phone Book Caller Idid Operationi Caller ID OperationReview Calls Log Store Record in Phone BookFor example Display Dial Dialing OptionsRemove Call Records Removing a Specific Call RecordRemoving All Records Audible Indicators Turn Answering System On/OffSet the Clock Answering System Operation About MailboxesAbout Announcements RecordYour Announcement To delete your announcementAnswering System Feature Setup Make sure the answering system is onFeture Summary Listen to, Save & Delete Messages Play MessagesDelete Messages Adjust Playback Volume Call Screening/Intercept Record a MemoMessage Window Display Window Displays WhenConnect with the Answering System Voice MenuRemote Access Commands Function CommandBattery Life Battery IndicatorCharge the Handset Battery Pack BatteriesiSpare Battery BatteriesReplace the Handset Battery Pack Difficultyi Case of DifficultyPhone Problem Solution If you hear noise or interference when using the phoneTo re-initialize the handset and base Handset on page 5 of this manualIf the phone does not ring when you receive a call Inin Case of DifficultyiCaller ID If the caller’s name or phone number is not displayedCase of Difficultyi Answering SystemIf messages are IncompleteRespond to commands If the system does notFrom a remote touch TV, music, etc. while you are recordingDefault Settings Default SettingsDefault Settings Function Default SettingTechnicali Specificationsi Technical SpecificationsTechnical Specifications Indexi IndexMute Save 9, 36, 39