AT&T 3658B user manual Difficultyi, Case of Difficulty, Phone

Page 62

ATT3658B manual-updated 5/19/04 5:34 PM Page 59

IN CASE OF DIFFICULTY

If you have difficulty operating this phone, try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1-800-222-3111. Please retain your receipt as your proof

of purchase.

PHONE

PROBLEM

If the phone does not work at all, check these items first:

SOLUTION

Make sure the power cord is plugged into the base and an electrical outlet not controlled by a wall switch.

Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack.

Make sure the battery pack is installed correctly.

DIFFICULTYI

If the above suggestions do not solve the problem, try re-initializing the handset and base (see “To re-initialize the handset and base” on page 61).

PROBLEMSOLUTION

If you have no dial tone: Check all the previous suggestions.

If you still do not hear a dial tone, disconnect the phone and try another phone in the same jack. If there is no dial tone on that phone either, the problem is probably in your wiring or local service.

ININ CASE OF

PROBLEM

If you hear two beeps when you try to use the handset:

SOLUTION

The handset and base are not communicating properly. You might be out of range. Move closer to the base and try again.

If moving closer to the base does not help,

follow the directions “To re-initialize the

handset and base” on page 60.

PH

 

59

Image 62
Contents With Caller ID/Call Waiting Part 1 Important Product InformationAdvanced American Telephones. All Rights Reserved Contents Before YOU Begin Parts ListYOU About the Calls Log Beforeyou BegininAbout Caller Identification Caller ID About Adding HandsetsTable/Desk Installation InstallationiInstallation Charge the handset battery InstallationInstall the handset battery Check for dial toneAbout Handset Registration Register an Additional Handset Model 5800 HandsetWall Installation Follow Steps 3-5 in Table/Desktop InstallationInstallationi Spare Battery/Power Failure BackupBelt Clip HeadsetFeature Setup Menu Feature Setup HandsetFeature Setup Handset Set TimeClock Mode RegisterSound Select Ringer Volume Ringer #01 Ringer MelodyLow Batt Tone Range Tone Keypad Tone Set Contrast Language Setting Release Mto save your setting Feature Setup BaseFeature Setup Base   Make a Call Telephone OperationTelephone Operation Answer a CallBase Speaker VolumeHandset Make a Call Switch Between Handset and SpeakerphoneHandset Speakerphone Answer a CallDelete a Redial Number RedialSave a Redial Number Flash/Call Waiting BaseMute Hold Display Screen Messages Screen Displays WhenHandset Icons This Icon IndicatesBase Lights Light Status IndicatesTones and What They Mean Tone IndicatesIntercom Calls Intercom OperationIntercom Operation Answering Intercom OperationIntercom End IntercomBlind Call Transfer From the HandsetConference Calling Store a Number and Name in Phone Book Phone BookPhone Book Keypad Characters     Dial a Number in Phone BookGeorge Edit a Number/Name in Phone BookDelete a Number/Name in Phone Book Caller Idid Operationi Caller ID OperationFor example Review Calls LogStore Record in Phone Book Display Dial Dialing OptionsRemoving All Records Remove Call RecordsRemoving a Specific Call Record Set the Clock Audible IndicatorsTurn Answering System On/Off About Announcements Answering System OperationAbout Mailboxes RecordYour Announcement To delete your announcementAnswering System Feature Setup Make sure the answering system is onFeture Summary Delete Messages Listen to, Save & Delete MessagesPlay Messages Adjust Playback Volume Call Screening/Intercept Record a MemoMessage Window Display Window Displays WhenConnect with the Answering System Voice MenuRemote Access Commands Function CommandCharge the Handset Battery Pack Battery LifeBattery Indicator BatteriesiSpare Battery BatteriesReplace the Handset Battery Pack Phone DifficultyiCase of Difficulty To re-initialize the handset and base Problem SolutionIf you hear noise or interference when using the phone Handset on page 5 of this manualIf the phone does not ring when you receive a call Inin Case of DifficultyiCaller ID If the caller’s name or phone number is not displayedIf messages are Case of DifficultyiAnswering System IncompleteFrom a remote touch Respond to commandsIf the system does not TV, music, etc. while you are recordingDefault Settings Default SettingsDefault Settings Function Default SettingTechnical Specifications Technicali SpecificationsiTechnical Specifications Indexi IndexMute Save 9, 36, 39